Search found 5 matches
- Wed Sep 09, 2009 9:19 pm
- Forum: Samsung Discussion
- Topic: Need a dead board, either a sub detect or analog
- Replies: 2
- Views: 4593
Re: Need a dead board, either a sub detect or anal
Unfortunately I tried that route already. They indicate they get working sets and dismantle them so they dont have 'bad' boards. Other places have said they send most bits back for core, but these would strike me as more of a throwaway. Looks like its just watching ebay for something cheap. Thanks t...
- Sun Sep 06, 2009 5:56 am
- Forum: Samsung Discussion
- Topic: Need a dead board, either a sub detect or analog
- Replies: 2
- Views: 4593
Need a dead board, either a sub detect or analog
Hey folks. A connector has come off one of my boards and I need a donor board to desolder a 3 pin connector. It appears that samsung uses standard fan connectors and either an anolog board or sub detect board (the one that the dmd and lamp fans plug into) have these connectors. If someone has a dead...
- Fri Sep 04, 2009 5:25 am
- Forum: Samsung Discussion
- Topic: Will not power on, 3 lights when plugged in. Ideas
- Replies: 7
- Views: 9991
Re: Will not power on, 3 lights when plugged in. I
Happy days!! After ordering a couple bits on ebay, it turns out its the power supply. I had ruled it out as it was sending 400 volts to the ballast, but the portion that powers the DMD was dead. Put the new power supply in and fired right up and is working fine.
- Fri Jun 26, 2009 5:07 am
- Forum: Samsung Discussion
- Topic: Will not power on, 3 lights when plugged in. Ideas
- Replies: 7
- Views: 9991
Re: Will not power on, 3 lights when plugged in. I
I cant reset the lamp timer as the set wont turn on. And it seems pretty sure that the lamp was never the issue. As far as sounds, no sounds what so ever save the single click when the set is plugged in which appears to come from the power supply. It seems on plug in that there is some kind of check...
- Thu Jun 04, 2009 7:08 am
- Forum: Samsung Discussion
- Topic: Will not power on, 3 lights when plugged in. Ideas
- Replies: 7
- Views: 9991
Will not power on, 3 lights when plugged in. Ideas
My HLR4667W was working just fine for the last 3 years with mostly infrequent use. Went to turn it on and no picture or audio. Initially when hitting the power button it was flashing the timer and standby. But after unplugging it and plugging it back in, it does not respond to the power button and a...