Samsung hlr4667wax/xaa
Moderator: Angel
Forum rules
Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
it seems you have changed every component and I am assuming you double checked every connection and made sure the cover and lamp door was back in place before firing the TV up again (or attempting to)..
Can you describe in detail the blinking of the lights? on some models, the amount of times they blink then remain steady indicate codes of where the error takes place. Note that the blinking can be ongoing and if so we are going to have to trouble shoot in depth!
Hope I can be of service.
Re: Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
Noises, boot cycles, spark sounds, screen flashing, lamp can be seen ignited from the back...
Hope I can help.
Re: Samsung hlr4667wax/xaa
Re: Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
I can understand your frustration and I apologize for the late response, your replies somehow get lost in all of the posts, do not worry I put a tracker on your username!
So again wow! you have replaced every major component in the TV, please correct me if I am wrong but you also replaced the lamps ballast am I right?
Where all your replacement parts purchased on eBay? DMD, Colorwheel, etc?
To me it sounds like a Colorwheel or Ballast issue.. A DMD will hardly prevent the TV from actually turning on as opposed to giving you on screen problems..
Re: Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
And how awesome of a seller, you don't get many of those around ebay. the more you explain the problem the more you convince me that it might just very well be the colorwheel (I am sure the seller and yourself are using the proper BP96-00674A model for this TV). I am a little more than confused about the clicking sound.. are you sure it is coming from the input board? (where the cable connects)
Re: Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
I hope I can be of some help, let me know, hopefully someone else jumps in! I am having one of my techs read your thread..
Good luck!
Re: Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
Re: Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
Re: Samsung hlr4667wax/xaa
Re: Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
Yes ok so the clicking has to be at the ballast end, so if you replaced the ballast, logically this would only leave the lamp, where did you purchase the lamp from?
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Samsung hlr4667wax/xaa
But sure any RPTV is relatively easy to work with.. this one for example I am sure you put you time and rebuilt everything properly, but sometimes i leave something alone for a couple of days and when i come back to it I notice something off, like a lamp door cover switch i forgot to replace or got bitten off etc..
Either way you decide to go we are here to help!
Re: Samsung hlr4667wax/xaa
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact: