Color problems after color wheel replacement

[beamancr]

I just replaced the color wheel in my DLP (Model HLR4266WX/XAA) and now the picture is horrible. The colors are totally off. I've read something about "jump" cables, can anyone help? Can't afford a repairman. Thank you!

[darkart77]

f you are installing this FAB Bearing (SILVER) Colorwheel + Housing, in place of your FDB Bearing (GOLD) Colorwheel you will need to REMOVE a jumper ("OPEN") on the DMD Board (Jumper CN810). This jumper is on the BACK SIDE of the DMD Board (usually covered by an aluminum panel--you do not need to take this panel off unless you have trouble accessing the jumper