HLR5667W Channel Program, Digital Board ?
Posted: Wed Sep 07, 2011 5:06 pm
Maybe someone can help me ? I have repaired a few of these HLRXX67 dlp's in the past by replacing the digital boards. But this one has me a little puzzled ???? The tv works fine with basic cable going into the coax connection but when I do a channel scan it only picks up channels around 49 and up. No 2, 4, 5, 9, 11 and so on also No local HD channels ??? I have another HLR5067 in my basement and have taken it to the same coax connection and it gets these missing channels fine. Also the little fan that plugs into the Analog board spins on start up but quits right after and never runs ??? I'm not getting a check fan notification from the set either.
I'm doing the auto program exactly the same on both sets but missing a big chunk of channels on the HLR5667W set. I know the Analog and Digital boards are tied together. Could this be the digital board thats at fault for the fan not working and missing channels ???? Any ideas or direction is much appreciated !!!
I'm doing the auto program exactly the same on both sets but missing a big chunk of channels on the HLR5667W set. I know the Analog and Digital boards are tied together. Could this be the digital board thats at fault for the fan not working and missing channels ???? Any ideas or direction is much appreciated !!!