Page 1 of 1
Strong Noise when turn on DLP SP-50L3HR
Posted: Tue Apr 21, 2009 7:34 pm
by ekruas
I have a sansung dlp sp-50l3hr
it has about 2 years old
this week, i turn it on and about 30 seconds a very strong and weird noise appear
then i run to the wall socket and turn it off, and a the noise was getting weak
for sure is a spin thing
then a open the back of the tv
and i see a fan, i unplug it and turn the tv on, the noise continues,
its not this first fan, i think its the lamp fan,
how i reach there?
Re: Strong Noise when turn on
Posted: Tue Apr 21, 2009 8:15 pm
by Angel
Do you have any LEDs blinking on the front pannel?
When it's a fan issue the Timer and the Standby LEDs should be blinking according to your manual. There's another possibility, maybe is a problem with your colorwheel, do you have any problem with your picture?
However I think you should see the another fan if remove the whole back cover.
HTH.
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Thu Apr 23, 2009 4:59 am
by ovadoggvo
erkuas,
The problem you are describing is 90% chance your color wheel! Do not attempt to turn on the TV any more as you may damage other components within your TV. Look here:
http://guides.fixyourdlp.com/samsung/bp96-01579a.phpThis a good guide on what your color wheel is and how to replace it.
The color wheel you need is BP96-00674A but be careful!!! There are 2 versions of the color wheel.. If you buy bare, make sure you buy the right one.. If you buy the whole assembly, make sure you know what the difference is and you change the jumper accordingly.. Look here for more information about the 2 versions:
http://www.discount-merchant.com/produc ... rwheel.htm
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Thu Apr 23, 2009 12:04 pm
by ekruas
i dont have problens with the colors and n leds are blink,
the guide that you send me waht i was looking for
how do i really know if is the color wheel?
i will open the back cover now
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Sun Apr 26, 2009 11:44 pm
by ekruas
i open the back cover, and the problem is the color wheel
i took some photos of the color wheel because i dont know if is the gold or the silver
http://img22.imageshack.us/gal.php?g=img3171ufz.jpgsomeone can help?
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Mon Apr 27, 2009 10:17 pm
by Angel
It seems to be a silver bearing color wheel, but just to make sure you can remove it from the chassis, anyway you'll do that when replacing it.
HTH.
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Tue Apr 28, 2009 2:27 am
by champa
alternatively you can order the complete wheel assembly including the housing.. that's what I did from the partstore.com
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Sat May 09, 2009 10:40 pm
by ekruas
i have to buy just the color wheel or the color wheel and the housing?
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Mon May 11, 2009 3:26 pm
by Angel
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Tue May 12, 2009 1:23 am
by ekruas
so,
if my color wheel is silver i can buy a silver color wheel without the housing
but can i buy a gold one without the housing??
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Tue May 12, 2009 12:52 pm
by Angel
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Wed Jul 15, 2009 12:24 pm
by ekruas
where can i buy the color wheel with the housing?
there are many models or just one?
what is the problem with the jumper?
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Wed Jul 15, 2009 4:32 pm
by Angel
Re: Strong Noise when turn on DLP SP-50L3HR
Posted: Thu Jul 16, 2009 12:25 am
by ekruas
