HL61A650 Problem after already trying bulb
Posted: Wed Nov 24, 2010 6:24 am
http://www.youtube.com/watch?v=GCPCvrSyyGo
See this video I have the exact same problem. I've replaced my bulb from DM within the last 3 months. I've cleaned the inside of my machine. I've checked that the gate is closed. I've reset my timer. I've walked through the full sequence described here: viewtopic.php?f=10&t=19 only to fail at Ballast powering up the Bulb. I repeat the bulb does not power up. I have no strange noises coming from the color wheel, and I've inspected it and its fine. The ballast does attempt to fire and I see the small LED on the ballast flicker like in the video and then nothing.
Is this more of a capacitor blown on the power supply or on the ballast?
Seems like very few people are knowledgeable about the HL##A Series here... any responses would be great.
MP
See this video I have the exact same problem. I've replaced my bulb from DM within the last 3 months. I've cleaned the inside of my machine. I've checked that the gate is closed. I've reset my timer. I've walked through the full sequence described here: viewtopic.php?f=10&t=19 only to fail at Ballast powering up the Bulb. I repeat the bulb does not power up. I have no strange noises coming from the color wheel, and I've inspected it and its fine. The ballast does attempt to fire and I see the small LED on the ballast flicker like in the video and then nothing.
Is this more of a capacitor blown on the power supply or on the ballast?
Seems like very few people are knowledgeable about the HL##A Series here... any responses would be great.
MP