Page 1 of 1

Help! Lamp comes on, no picture

Posted: Fri May 01, 2009 4:56 pm
by SeanM
Hi All - Any help is greatly appreciated. A few weeks ago my Samsung HL-T5075S started shutting off randomly while making buzzing noises. I immediately suspected the lamp and replaced that myself, but it did not fix the problem. I had a tech come to the house, and he diagnosed the problem as a bad ballast. He replaced the ballast a week ago, and everything was working fine until today. Today, the TV shut itself off (this time, without the buzzing noises). When I attempt to power it on, it makes the normal strong "click" and then nothing happens for about 30 seconds. After about half a minute, the lamp comes on, but I get no picture or sound. After about 3 minutes of this, it then turns itself off.

The TV is 14 months old, and like I said, it has a new lamp and ballast. Does anyone have any idea what might be the problem?

Re: Help! Lamp comes on, no picture

Posted: Mon May 04, 2009 5:04 pm
by Kelly
SeanM,

The problem could be that your Ballast and lamp wattage are not matching up. You need to check to see if the lamp and Ballast are compatable with eachother. Get back to me with more info so I can help you trouble shoot.

Re: Help! Lamp comes on, no picture

Posted: Tue May 05, 2009 5:15 pm
by SeanM

Re: Help! Lamp comes on, no picture

Posted: Tue May 05, 2009 7:02 pm
by Kelly
SeanM,

I would not go spending 600 bucks without a second opinion. I was thinking and it could also possibly be your color wheel.

Re: Help! Lamp comes on, no picture

Posted: Tue May 05, 2009 8:17 pm
by SeanM

Re: Help! Lamp comes on, no picture

Posted: Tue May 05, 2009 9:11 pm
by Kelly
I would say go for it! Just use the service manual to guide you. Best case you fix it and worse case it's still broken like you said. I mean these TV's are out dated now in our technology growing world anyway. If you can't fix it just get a new TV and make sure it's not a DLP. Good luck let me know how it comes out for you.

Re: Help! Lamp comes on, no picture

Posted: Tue May 05, 2009 9:58 pm
by SeanM

Re: Help! Lamp comes on, no picture

Posted: Tue May 05, 2009 11:45 pm
by Kelly
SeanM

I can't say for sure because I'm not there to see it you know what I mean. Because it may not be your DMD board it could be a number of things possibly your color wheel even. So it's really up to you.

Re: Help! Lamp comes on, no picture

Posted: Tue May 05, 2009 11:56 pm
by SeanM

Re: Help! Lamp comes on, no picture

Posted: Wed May 06, 2009 3:31 pm
by Kelly
SeanM,

It's really hit or miss you know. I can't be sure what the exact problem is with your case. I wish I could be of more help.