HL-S5086W...3 Blinking Lights of Death
Posted: Mon Jun 08, 2009 8:18 pm
Hopefully someone can point me in the right direction. Been researching through the forums, but have not seen anything similiar to my problem. Obviously, have the three blinking lights which could mean several things.
I have replaced the lamp and reset the lamp meter, but still have following issue:
Once i turn tv on, everything appears to work fine. Colorwheel spins, both fans on, lamp ignites and screen looks perfect.
After about 5 minutes, lamp blinks once and power shuts down, and the 3 blinking lights of death resume.
I have ordered a DMD board, but now thinking it could be the ballast or temperature sensor based on some of the posts here...
Has anyone had an experience like this?
Thanks
I have replaced the lamp and reset the lamp meter, but still have following issue:
Once i turn tv on, everything appears to work fine. Colorwheel spins, both fans on, lamp ignites and screen looks perfect.
After about 5 minutes, lamp blinks once and power shuts down, and the 3 blinking lights of death resume.
I have ordered a DMD board, but now thinking it could be the ballast or temperature sensor based on some of the posts here...
Has anyone had an experience like this?
Thanks