Page 1 of 1
Samsung HLM507W ONLY works after unpluging it
Posted: Thu Mar 19, 2009 9:52 pm
by HaQKR81
Three blinking lights of death (hehe, like the Microsoft XBOX). What's going on with my set? If I unplug it and plug it back in the TV turns on fine.
Re: Samsung HLM507W ONLY works after unpluging it
Posted: Thu Mar 19, 2009 9:54 pm
by HaQKR81
Scratch that, I just checked it again after writing the last post and now it's not turning on at all! The TV made a screeching noise before too, I think its the light wheel?
Re: Samsung HLM507W ONLY works after unpluging it
Posted: Thu Mar 19, 2009 9:55 pm
by HaQKR81
I pulled out the lamp and it looks fine, I guess that's ruled out?
Re: Samsung HLM507W ONLY works after unpluging it
Posted: Thu Mar 19, 2009 9:55 pm
by Eddie
Re: Samsung HLM507W ONLY works after unpluging it
Posted: Thu Mar 19, 2009 10:17 pm
by ASNLovin23
HaQKR81, sounds like a color wheel.
But you might have a bad lamp failing at the same time. Here are the part numbers:
BP96-00224C LAMP ASSEMBLY
BP96-00250A COLOR WHEEL
The BP96-00224C was replaced with part number BP96-00224J by Samsung, so either one you can find should work.
Just in case you want to replace all the possible bad components, your ballast part number is: BP47-00008A
Re: Samsung HLM507W ONLY works after unpluging it
Posted: Thu Mar 19, 2009 10:28 pm
by discountmerchant
I thought I'd jump in and tell you all we have a wide variety of color wheels at our store.
http://www.discount-merchant.com/Search ... lick=38489Just check out all the color wheels, we might have one for you!
Thanks for letting us be apart of FixYourDLP.com!
Discount-Merchant.com