HLS4266wx,PB01 not working after replace all items
Posted: Mon May 23, 2011 4:37 pm
Hi All
I need your help figuring out the issue with my Tv.
Model is HL-S4266wx and is PB01 (since i saw here theres is a difference)
I will try to explained the symptoms as better as i can, since my english is not 100%
The Turns on makes the click sound that the ballast should do
evreything starts running including the lamp and a few seconds after you see video displayed on TV you start hearing the color wheel doing chimmering noise at the same time as the lamp is (like) loosing power. after this, it just turns off and it will turn on again and repeat everything for like 3 times and then it will go to the 3 blinking lights.
It looks like both parts are sync when this happends (meanng the sound from the coloewheel with the lamp loosing power)
I have replace the Lamp first with a phillip lamp and it keep doing same symptoms.
So, the following thing i did was replaced the Ballast. I have installed two of this already and sam results. First replacement, turn and worked fine for like a 1 min. or 2 min. then same sympthoms came back. Second replacement of the ballast didnt do any change.
Like i mentioned i also changed the colorwheel since i saw that this could trigger the 3 blinking lights (or the smile face).
the color wheel has whispering noise, so it needed to be changed anyways.
Now, i saw that it wont hurt to do a reset on service menu on the lamp hours, so i did. But the strange thing is that when the TV is in servive menu, the TV work fine, but when i reset it will try to turn on immediately and repeats the same sympthoms as described above.
Hopefully i have described my problems as clear as possible and that some one could help figure out the real problem. If you requiere more info, just let me know.
Thanks in advance
I need your help figuring out the issue with my Tv.
Model is HL-S4266wx and is PB01 (since i saw here theres is a difference)
I will try to explained the symptoms as better as i can, since my english is not 100%
The Turns on makes the click sound that the ballast should do
evreything starts running including the lamp and a few seconds after you see video displayed on TV you start hearing the color wheel doing chimmering noise at the same time as the lamp is (like) loosing power. after this, it just turns off and it will turn on again and repeat everything for like 3 times and then it will go to the 3 blinking lights.
It looks like both parts are sync when this happends (meanng the sound from the coloewheel with the lamp loosing power)
I have replace the Lamp first with a phillip lamp and it keep doing same symptoms.
So, the following thing i did was replaced the Ballast. I have installed two of this already and sam results. First replacement, turn and worked fine for like a 1 min. or 2 min. then same sympthoms came back. Second replacement of the ballast didnt do any change.
Like i mentioned i also changed the colorwheel since i saw that this could trigger the 3 blinking lights (or the smile face).
the color wheel has whispering noise, so it needed to be changed anyways.
Now, i saw that it wont hurt to do a reset on service menu on the lamp hours, so i did. But the strange thing is that when the TV is in servive menu, the TV work fine, but when i reset it will try to turn on immediately and repeats the same sympthoms as described above.
Hopefully i have described my problems as clear as possible and that some one could help figure out the real problem. If you requiere more info, just let me know.
Thanks in advance