FixYourDLP.com Forums

I reflowed the digital board for a hlr5067. After I got everything together and turned it on for the first time, the lamp light came on but no pictured appeared and it powered off automatically after a few minutes. On second power up, I got a picture. All full digital broadcast worked fine, but all analog had the green squares, green lines or all green screen. Since then, I only get a faint glow on a black screen and no audio. Lamp is on but there is no visible picture.

Is there a master reset or reboot. Anyone else have this after reflow. Is there anything else I can do other than buy new board?

sounds like the reflow didn't work for you. you should contact the reflow person and see if they will reflow it again or you. if that doesn't work you will need a replacement digital board. The guy does offer to refund 50 of the 75 if it isn't repairable. look the part up on www.samsungparts.com and then heck discount merchant to see if they have it for less. also there are a few digital boards that will work. BP94-02084A is one of them.

What is this reflow thing all about?