Hello,
I have an old VS-60707 which has sound but no picture. None of the bulbs are on. This has the 3 bulbs red, green, blue. I have cleaned the dust out of the tv and there are no damaged circuits on the board, I have ran the code check on the tv and I get the 1-2 flashes meaning everything is checking out OK. I have voltage at the component which feeds the i believe to be the ballast, but can read no voltage at the ballast. Is the ballast the component which feeds all 3 of the bulbs and looks like a distributor (black with 1 wire coming in and 3 wires going out? Any help would be greatly appreciated. Thanks.
vs-60707 sound but no picture
Moderator: Angel
Forum rules
-
grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: vs-60707 sound but no picture
Hello,
no the ballast feeds the lamp about 15kV so i do not recommend testing it. this part is also notorious for malfunctioning on Mits. models.
When was the last time you replaced the lamp?
no the ballast feeds the lamp about 15kV so i do not recommend testing it. this part is also notorious for malfunctioning on Mits. models.
When was the last time you replaced the lamp?
