KDF-70XBR950 Picture Problem


Moderator: Angel

Forum rules
melonberry
Contributor
Contributor
Posts: 6
Joined: Fri Jun 05, 2009 4:58 am

KDF-70XBR950 Picture Problem

Postby melonberry » Fri Jun 05, 2009 5:22 am

Hello!

My 6 Year old 70 inch is failing on me! The LCD is lit when I turn on the power, but it does not show a picture. All I have on the screen is 2 vertical fat white strips. I have sound, and I can change the channel but the only thing that shows are the 2 lines on a blackground. The lines are still bright, so I have not tried to replace the lamp yet.

TV.jpg
The image on my screen
TV.jpg (58.46 KiB) Viewed 21659 times

TV 001.jpg
After replacing the Light Engine
TV 001.jpg (121.92 KiB) Viewed 21629 times

TV 002.jpg
After replacing the Light Engine
TV 002.jpg (108.37 KiB) Viewed 21629 times


Anyone have any ideas?
Last edited by melonberry on Sat Jun 13, 2009 9:41 pm, edited 1 time in total.

Jake
Tech Junkie
Tech Junkie
Posts: 114
Joined: Thu Mar 12, 2009 11:57 pm
Location: Tijuana, Mexico AJUAAAAAAAA!

Re: KDF-70XBR950 Picture Problem

Postby Jake » Fri Jun 05, 2009 9:26 pm

Press the Pause button, hehehehe... just kidding.

ammm...that's a problem with the light engine system.
To be honest i think you have to replace the full assembly ._.

that's my recommendation. Lets see if more people can comment.
[color=#FF0000]Jakey![/color]

melonberry
Contributor
Contributor
Posts: 6
Joined: Fri Jun 05, 2009 4:58 am

Re: KDF-70XBR950 Picture Problem

Postby melonberry » Sat Jun 06, 2009 1:13 am

I hope your not talking about the optical unit block assembly. I checked the price from sony, and it was about $1500! :(

melonberry
Contributor
Contributor
Posts: 6
Joined: Fri Jun 05, 2009 4:58 am

Re: KDF-70XBR950 Picture Problem

Postby melonberry » Mon Jun 08, 2009 5:37 pm

I found the sony surplus store, and they are changing way less ~$580 (including tax and shipping). They warranty the unit for 1 year. Hopefully this unit will last me another 6 years, when I decide to buy a new TV. I'll keep you guys posted of the results after I install it.

If anyone is interested the Sony surplus store is:


The optical unit block assembly aka light engine part number for the KDF-70XBR950 is A1606039A.

melonberry
Contributor
Contributor
Posts: 6
Joined: Fri Jun 05, 2009 4:58 am

Re: KDF-70XBR950 Picture Problem

Postby melonberry » Sat Jun 13, 2009 8:40 pm

Ok so I replaced the light engine assembly, which i spent about 2 hours on. I still have the same problem, although the color is more vivid. Sigh... anyone else have any ideas?

User avatar
Angel
Site Admin
Site Admin
Posts: 446
Joined: Sat Apr 04, 2009 1:52 am

Re: KDF-70XBR950 Picture Problem

Postby Angel » Wed Jun 17, 2009 9:16 pm

Hi melonberry.

It seems like if you have something obstructing the red light... Are you sure you replaced the complete light engine? cause if you did it then this problem should be fixed with that replacement.
The best "Do It Yourself" site for all types of Displays!

Jake
Tech Junkie
Tech Junkie
Posts: 114
Joined: Thu Mar 12, 2009 11:57 pm
Location: Tijuana, Mexico AJUAAAAAAAA!

Re: KDF-70XBR950 Picture Problem

Postby Jake » Wed Jun 17, 2009 10:00 pm

I agree with NEhelp....

I had the same question, if you replace the LCD optical block.

The reason is that when you buy the full light engine is basically the video board, the LCD optical block and light tunnel.

If you bought the assembly without the optical block basically is going to be the same thing; is like having a flat tire and you change just the rim, using the same tire.

For what i can tell...if you are using the same optical block.

Blue lines or blob is a problem with the RED mirror.
Purple lines or blob is with green.
Yellow is problem with the blue one.

With the lines that you have ammm...i can say that maybe there's some cracks or some dirt on the RED lens.

Open up the light engine and check the optical block.
[color=#FF0000]Jakey![/color]

melonberry
Contributor
Contributor
Posts: 6
Joined: Fri Jun 05, 2009 4:58 am

Re: KDF-70XBR950 Picture Problem

Postby melonberry » Thu Jun 18, 2009 2:08 am

I'm pretty sure I changed out the entire assembly. There is only one part number for the light assembly. I could be wrong though. The package I received came in two pieces. I've installed both.

Lets assume there is a problem with the red mirror. Where would the red mirror be located?

Attached are some images I pulled from the service manual.
I don't know if I can post it, but I will anyways in hope to inspire help! :twisted:

Optical-Unit-Block-Assembly.jpg
Optical-Unit-Block-Assembly.jpg (161.65 KiB) Viewed 21616 times

C2 Block.jpg
C2 Block.jpg (244.62 KiB) Viewed 21616 times

melonberry
Contributor
Contributor
Posts: 6
Joined: Fri Jun 05, 2009 4:58 am

Re: KDF-70XBR950 Picture Problem

Postby melonberry » Mon Jun 29, 2009 1:33 am

Ok so a miracle happened this weekend. My TV started working again on its own!!

I took out the new replacement optical block, and the C2 block and I returned it. I put back in the old ones, and fiddled with the lamp a bit before I put it in as well. I've had luck in the past that when I put stuff back together it just magically starts working again. Turning back on the TV, the lines where still there. Then I went to the back of the TV to hook up the dvd player, when I went back to the front the lines were gone!

I'm not sure what happened, its probably intermittent problem, but I hope that was the only time it happens!

Below are some photo's I took of the service menu after I turned it back on. If anyone ever wants to shed some light on this, please do.

TV 003.jpg
TV 003.jpg (99.29 KiB) Viewed 21592 times

TV 004.jpg
TV 004.jpg (75.19 KiB) Viewed 21592 times

Jake
Tech Junkie
Tech Junkie
Posts: 114
Joined: Thu Mar 12, 2009 11:57 pm
Location: Tijuana, Mexico AJUAAAAAAAA!

Re: KDF-70XBR950 Picture Problem

Postby Jake » Tue Jul 07, 2009 1:40 pm

mhhhhmmmm...oooo...k.

hahahaha...well its very nice to know that your TV is now working.
:D
[color=#FF0000]Jakey![/color]


Return to “Sony LCD Projection Discussion”