error message filter cleaning


Moderator: Angel

Forum rules
rwing
Newbie
Newbie
Posts: 2
Joined: Sat Feb 06, 2010 2:08 pm

error message filter cleaning

Postby rwing » Sat Feb 06, 2010 2:18 pm

Cleaned filters now how do i resit the sirflter message, I took the entire television apart, cleaned the filter inthe back snd dusted off the front filter, now it is still timing out after 1 min and not going away? how do I reset this error? un1t is clean, temp sensors are good I checked them, seems panasonic does not have any itea, told to throw it wwY,,, i WAS TOLD THIS WOLD LAST THAT IT WOULD BE GOOD anyibe elaw ogo the info,

User avatar
Eddie
Moderator
Moderator
Posts: 221
Joined: Thu Mar 12, 2009 8:58 pm
Contact:

Re: error message filter cleaning

Postby Eddie » Tue Feb 09, 2010 5:54 pm

If you took it apart, you can put it back together. I don't think there's a reset code, but possible the code that came up wasn't the problem in the first place.
--

Eddie

rwing
Newbie
Newbie
Posts: 2
Joined: Sat Feb 06, 2010 2:08 pm

Re: error message filter cleaning

Postby rwing » Wed Feb 10, 2010 8:21 am


User avatar
Eddie
Moderator
Moderator
Posts: 221
Joined: Thu Mar 12, 2009 8:58 pm
Contact:

Re: error message filter cleaning

Postby Eddie » Wed Feb 10, 2010 5:59 pm

Not for Panasonic as far as I know, but maybe. The Toshibas had law suits, so did the Sonys.

It may just be a bad temp sensor... for all your troubles, if it eventually comes on, I wouldn't sink too much money into fixing it. You might be able to find someone to part with their old TV or even find the temp sensor on DM or something.
--

Eddie


Return to “Panasonic Discussion”