Hello rajantonyv.
First let’s get one thing clear, this is not a guide, this is a reference of one of my old Toshiba TV that I happened to take out the light engine, so you can get an idea of what to expect. The real trick is to keep two thing in mind, 1.- remember what, where and when you disconnect something. 2.- Your going to make a mess, so everything you take out, organize it.
Ok let’s start.
Your going to start at the back of the TV, take out the back of the panel, you’ll se the tv is divided in two, the video board (analog & digital) and the light engine ( it takes 2/3 of the space on the back).
Get your favorite screwdriver (your going to take out a lot of screws) and remove anything that get in the way of the light engine.
Mine looked like this.
- DSC02095.jpg (67.25 KiB) Viewed 16403 times
Now you got to remove your lamp from the old one so you can later install it in the new one.
- DSC02078.jpg (46.68 KiB) Viewed 16403 times
To completely remove the light engine from the rest of your TV there are some cable you have to disconnect.
- DSC02081.jpg (42.17 KiB) Viewed 16403 times