FixYourDLP.com Forums

Hello all again.
Since I’ve been getting a lot of questions regarding how to replace a ballast, I final got a Toshiba 52HMX8 DLP TV in the shop that needed a new ballast so I took my trusty camera and started taking pic’s.
As a result here is my ballast removal guide.

1.- On the back of the TV you’ve got to remove some screws that are securing the back cover of the TV.

ASC02175.JPG (65.16 KiB) Viewed 7155 times

ASC02176.JPG (71.27 KiB) Viewed 7155 times

2.- You’ll notice that there is aluminum bar in the middle, you’ll need to remove it.

ASC02178.JPG (88.65 KiB) Viewed 7155 times

3.- Now remove the screws that hold the metal plate under the lamp & ballast.

ASC02181.JPG (81.64 KiB) Viewed 7154 times

ASC02184.JPG (57.91 KiB) Viewed 7154 times

ASC02186.JPG (64.76 KiB) Viewed 7154 times

4.- You’ll be able to see the lamp enclosure along side the metal cage that hold the ballast.

ASC02187.JPG (80.65 KiB) Viewed 7154 times

5.- Carefully pull the metal plate carrying the lamp enclosure & ballast.

ASC02192.JPG (101.02 KiB) Viewed 7154 times

ASC02198.JPG (96.22 KiB) Viewed 7154 times