Vizio LP2626 no signal
Moderator: Angel
Forum rules
-
sportsman99
- Newbie
- Posts: 1
- Joined: Wed Oct 20, 2010 4:48 pm
Vizio LP2626 no signal
Hello, i need some assistance on a LP2626 , I have a no signal shown no matter what input i use, it is not a cable issue, etc,,,. i have the back off the unit and so far found nothing wrong. could anyone give me some pointers as to the voltages etc, to verify to trouble shoot which board is defective. i have read other forums and could there be a cap that is defective, i have read of putting a 10k res, across a IC. any help would be greatly appreciated.
-
grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: Vizio LP2626 no signal
Hello!
this is most likely an issue with your input board. easy to replace! did you try HDMI? maybe it is the digital video board, or if you have hung it on the wall lately maybe something got unplugged...
this is most likely an issue with your input board. easy to replace! did you try HDMI? maybe it is the digital video board, or if you have hung it on the wall lately maybe something got unplugged...
