Hi,
I just replaced my color wheel for my HLN437W DLP and the picture is fine through S-video, and Composite (red/white/yellow)
Now I can't get a picture through the Component inputs. My model has 3 sets, I have tried all 3 and it cannot recieve a signal. It does recognise that something is connected to it through the source selection though.
Any help or suggestions would br greatly appreciated.
Thanks.
HLN437W No component signals after color wheel rep
Moderator: Angel
Forum rules
Re: HLN437W No component signals after color wheel rep
Problem solved:
The 2 components I was trying to hook up were set to 1080i and would not show up until I hooked them back up to my New Samsung LCD and reduced the input setting to 1080p.
(xbox 360 & a older Sony dvd theater in a box)
Well at least I found this site, It has alot of info.
Thanks again.
The 2 components I was trying to hook up were set to 1080i and would not show up until I hooked them back up to my New Samsung LCD and reduced the input setting to 1080p.
(xbox 360 & a older Sony dvd theater in a box)
Well at least I found this site, It has alot of info.
Thanks again.
Re: HLN437W No component signals after color wheel rep
Glad you found out what was wrong. I had no idea on this one. I have the same tv in my bedroom. I picked it up for free. It had issues of turning off at random times when I picked it up. It just had bad solder joint issues in the power supply.
I was lost why you lost signals after color wheel replacement.
I was lost why you lost signals after color wheel replacement.