HLN437W No component signals after color wheel rep

[ecko51]

Hi,
I just replaced my color wheel for my HLN437W DLP and the picture is fine through S-video, and Composite (red/white/yellow)

Now I can't get a picture through the Component inputs. My model has 3 sets, I have tried all 3 and it cannot recieve a signal. It does recognise that something is connected to it through the source selection though.


Any help or suggestions would br greatly appreciated.
Thanks.

[ecko51]

Problem solved:
The 2 components I was trying to hook up were set to 1080i and would not show up until I hooked them back up to my New Samsung LCD and reduced the input setting to 1080p.
(xbox 360 & a older Sony dvd theater in a box)

Well at least I found this site, It has alot of info.

Thanks again.

[Jason1976]

Glad you found out what was wrong. I had no idea on this one. I have the same tv in my bedroom. I picked it up for free. It had issues of turning off at random times when I picked it up. It just had bad solder joint issues in the power supply.

I was lost why you lost signals after color wheel replacement.