I own a 5yr old Samsung HLP6163WX/XAA
Keep turning off, replaced lamp, still turning off.
No blinking lights just steddy light Standby/Temp
Need Help!
Johnny
HLP6163WX/XAA
Moderator: Angel
Forum rules
Re: HLP6163WX/XAA
Here's some tips to help you identify the problem.
1. The TV gives a "Lamp Replacement" code when powering on the TV even when the lamp has been replaced.
2. The TV does not make a "Click" noise or "Surge" when pressing the power button. The click noise is one of the fastest ways to decide whether the ballast or other components of your TV are bad rather than the lamp.
3. The TV makes rapid "Clicking" noises (3-5 clicks every 2-3 seconds). This means that your ballast is weak and can not fire the lamp
If you hear a buzzing, humming or rapid clicking noises (Ballast symptoms)
1. The TV gives a "Lamp Replacement" code when powering on the TV even when the lamp has been replaced.
2. The TV does not make a "Click" noise or "Surge" when pressing the power button. The click noise is one of the fastest ways to decide whether the ballast or other components of your TV are bad rather than the lamp.
3. The TV makes rapid "Clicking" noises (3-5 clicks every 2-3 seconds). This means that your ballast is weak and can not fire the lamp
If you hear a buzzing, humming or rapid clicking noises (Ballast symptoms)