About Us - Page 120 of 171 - DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP

How to replace the ASK A6 Compact projector lamps

Shelagh McNallyPosted on June 3, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK A6 Compact projector

Install a ASK A6 Compact projector lamp

The ASK A6 Compact projector lampshas between 1500 to 2500 hours of lamp life, depending on usage and maintenance. A warning message

When it’s time to replace the ASK LAMP-013 in your ASK A6 Compact a warning message will appear on screen and the ALARM indicator located on the right side of the projector will flash red.

STEP ONE: Buy the right lamp

It’s important to install the correct ASK LAMP-013 lamp. Generic lamps often advertised as “compatible” lamps should be avoided since they are usually manufactured with inferior parts with little concern for safety. These knockoff lamps are prone to explosion and have been created using toxic substances such as Krypton-85.

Not only will these counterfeit generic lamp compromise your health and safety, installing one will void any warranty for your ASK A6 Compact projector. Spend the few extra dollars for a genuine OEM lamp that guarantees proper components and workmanship to ensure your projector is working at its peak. You’ll also be getting a lamp with a guarantee that you’ll be able to return should there be any problems. Educate yourself and learn how to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

Lutema Economy for Ask Proxima LAMP-013 TV Lamp (Bulb Only)
Lutema Platinum for Ask Proxima SP-LAMP-013 Projector Lamp (Original Philips Bulb)
Original Philips Projector Lamp Replacement for Ask Proxima LAMP-013 (Bulb Only)
<br>

STEP TWO: Replacing the lamp

1. Disconnect the power cord before opening the ASK A6 Compact lamp lid. The projector should be cool to the touch before changing the lamp.

2. Press the snap lock and lift up to remove the ASK A6 Compact lamp lid. A safety switch will cut off power supply to the ASK LAMP-013 lamp completely.

3. Unscrew the two safety screws holding the ASK LAMP-013lamp holder in place. Fold out the handle and pull out the old lamp holder. Be sure to dispose of the used ASK LAMP-013 lamp through a local recycling program. Don’t throw this lamp into regular garbage as it contains mercury.

4. Inset the new lamp all the way into the ASK A6 Compact projector until it stops.

5. Fold the handle back in. Tighten the two screws holding the ASK LAMP-013 lamp in place.

6. Snap the lamp lid back onto the projector. You’re now ready to reset the lamp timer.

STEP THREE: Reset the lamp timer

To reset the lamp timer on the ASK A6 Compact projector:

Open the MENU system.
Scroll down to OPTIONS. Press ENTER.
Scroll down to SERVICE. Press ENTER.
Click on LAMP TIMER RESET.
Click on YES.

The system will now recognize the new lamp and begin counting the lamp life of the newly installed lamp.

Tagged with: ASK A6 Compact projector, ASK LAMP-013, ASK LAMP-013 projector lamp, ASK projectors, authentic lamps, authentic projector lamps

3 Steps to a new ASK A4 Compact projector lamp

Shelagh McNallyPosted on June 1, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Compact A4 projector

Install a new ASK A4 Compact projector lamp in 3 easy steps

When it’s time ASK A4 Compact projector lamp a warning message will appear on screen and the ALARM indicator located on the right side of the projector will flash red.

STEP ONE: Buying the right lamp

It’s important to install a genuine ASK LAMP-013 lamp. Even though they are cheaper in price, avoid buying generic knock-offs or lamps advertised as “compatible.” These lamps are prone to explosion and have been created using toxic substances such as Krypton-85.

Using a counterfeit generic lamp will void any warranty for your ASK A4 Compact projector. A generic lamp can create poor illumination as well damaging the sensitive components in your projector. Knock-off lamps lack both the proper components and workmanship to ensure your projector is working at its peak. Learn how to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

STEP TWO: Replacing the lamp

1. Disconnect the power cord before opening the ASK A4 Compact lamp lid. The projector should be cool to the touch before changing the lamp.

2. Press the snap lock and lift up to remove the ASK A4 Compact lamp lid. A safety switch will cut off power supply to the ASK LAMP-013 lamp completely.

3. Unscrew the two safety screws holding the ASK LAMP-013 lamp holder in place. Fold out the handle and pull out the old lamp holder. Be sure to dispose of the used ASK LAMP-013 lamp through a local recycling program. Recycle this lamp.

4. Inset the new lamp all the way into the ASK A4 Compact projector until it stops.

5. Fold the handle back in. Tighten the two screws that hold the ASK LAMP-013 lamp in place.

6. Snap the lamp lid on back the projector. You’re now ready to reset the lamp timer.

STEP THREE: Reset the lamp timer

To reset the lamp timer:

Open the MENU system.
Scroll down to OPTIONS. Press ENTER.
Scroll down to SERVICE. Press ENTER.
Click on LAMP TIMER RESET.
Click on YES.

The system will now recognize the new lamp and begin counting the lamp life of the newly installed ASK LAMP-013 lamp.

Tagged with: ASK Compact A4, ASK LAMP-013, authentic projector lamps, genuine lamps

The affordable solution for the DLP TV white dot problem

Shelagh McNallyPosted on June 1, 2012 Posted in FixYourDLP, Rear Projection TV Lamp Replacement — 67 Comments ↓

Solving the DLP TV white dot problem

White dots, white snow or sparkling stars on your DLP TV mean only one thing – a worn out DMD chip. The DLP TV white dot problem seems to happen after two to five years – usually when the warranty has expired

Certain brands seem more vulnerable than others to the white dot syndrome. Samsung and Mitsubishi DLP TVs have been plagued with the problems for several years now. Sony and JVC choose to take the TVs set off the market in response to complaints from disgruntled owners.

If you read the various forums offering solutions, you’ll see customers being given quotes of $600 and upwards for solving the white spot syndrome or replacing the DMD DLP chip. Fortunately, there are companies offering the offering the DLP chip for under $300.

Find this New Mitsubishi/Toshiba 4719-001997 DLP Chip 1910-6143W on Amazon.

<br>

DMD DLP chip

Causes of DLP white dot syndrome

At the heart of every DLP TV, no matter what the brand is the DMD chip invented in 1987 by Dr. Larry Hornbeck of Texas Instruments. This optical semiconductor contains an array of up to 2 million hinge-mounted microscopic mirrors, so small they measure one-fifth the width of a human hair.

The DMD chip receives the digital or graphic signal reflecting it onto the TV screen to produce the stunning images that have made these TVs a frontrunner for the consumer. The mirrors themselves are made out of aluminum and mounted on a yoke with an axle that literally twists in the middle. The DMD micro mirrors switch on and off, either tilt towards the light or away from it.

This action creates the light or dark pixels on the screen and allows for a staggering 1,204 shades of gray. At the same time, the DLP lamp generates white light that passes through a red, green, and blue color filter to the surface of the DMD chip creating millions of colors.

DLP white dot syndrome happens when one of these micro mirrors gets stuck and can no longer reflect the signal. The result is a white or black dot on the screen. As more and more mirrors become stuck, more white dots appear on screen creating an image that can’t be viewed.

The affordable solution

In order to address the issue, Texas Instrument has created a replacement DMD DLP chip that is affordable and readily available from recognized distributors. While part numbers may vary, the chip remains the same. The following part numbers are interchangeable:

Samsung DMD Chip 4719-001997
Samsung DMD Chip 4719-001985
Samsung DMD Chip 4719-001999
Samsung DMD Chip W1272-5003
Mitsubishi DMD Chip 276P595010
Board Number DMD Panel IC# 1910-6143W
Board Number DMD Panel IC# 1910-6145W
Board Number DMD Panel IC# 1910-6103W

Avoid an expensive repair bill and keep your customers happy by purchasing a DMD DLP chip for under $300.

The importance of authentic

It’s important that you install an OEM lamp and avoid a generic, compatible lamp.

Knock-off, compatible generic lamps may seem like a bargain in the beginning. They actually cost more in the long run since they can damage the color wheel and ballast mechanisms in your RPTV. They also give off poor light, are prone to messy explosions and actually have a shorter life.

We recommend purchasing from an Authorized Philips dealer such as Discount-Merchant.com to insure that you are receiving a genuine Philips brand replacement lamp. Beware of knock-off and counterfeit Philips lamps floating around in the market.

There are also health concerns associated with these lamps. Generic lamps are made with toxic substances that can compromise your family’s health. Read more about the dangers of Krypton-85.

When you purchase an OEM replacement lamps you’re guaranteed the best lamp for your RPTV.

Find this New Mitsubishi/Toshiba 4719-001997 DLP Chip 1910-6143W on Amazon.

<br>

Tagged with: Board Number DMD Panel IC# 1910-6103W, Board Number DMD Panel IC# 1910-6143W, Board Number DMD Panel IC# 1910-6145W, DMD chip, DMD DLP chip, Mitsubishi DLP TV, Mitsubishi DMD Chip 276P595010, Samsung DLP TV, Samsung DMD Chip 4719-001985, Samsung DMD Chip 4719-001997, Samsung DMD Chip 4719-001999, Samsung DMD Chip W1272-5003, ToshibaBoard Number DMD Panel IC# 1910-6103W

When to replace the ASK LAMP-001 projector lamp

Shelagh McNallyPosted on May 31, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Proxima LAMP-001

The ASK LAMP-001 projector lamp will run for approximately 1500 -2000 hours before needing to be replaced. It’s critical to buy and install a genuine ASK LAMP-001 rather than a generic lamps. Although lower in price initially, these copy cat lamps usually end up costing much more in the long run. Often advertised as “compatible” these lamps are prone to explosion and you run the risk of being exposed to the carcinogenic substance Krypton-85 used in the making of these lamps.

Counterfeit generic lamp damage the sensitive components since copy cat manufacturers don’t have the correct components or know-how to build a proper lamp. The light provided by these lamps is also substandard with poor illumination and can damage your eyesight.

Installing a generic lamp will also void any warranty for your ASK Impression projectors. Go with an authentic ASK LAMP-001 OEM lamp sold by a dependable seller. Learn the 7 Ways to spot a counterfeit lamp.

Compatible Projectors

The ASK LAMP-001 is compatible with:

ASK Impression A8

ASK Impression A9

ASK Impression A10

For step-by-step instructions on replacing your ASK LAMP-001 projector lamp, click on your projector listed below:

ASK Proxima Impression A8

Click here for step-by-step instructions on how to change the ASK LAMP-001 projector lamp for the ASK Impression A8 projector.

ASK Proxima Impression A9, ASK Proxima LAMP-001

ASK Proxima Impression A9 projector

Click here for step-by-step instructionson how to change the ASK LAMP-001 projector lamp for the ASK Impression A9 projector.

ASK Proxima Impression A10, ASK Proxima LAMP-001

ASK Proxima Impression proector

Click here for step-by-step instructions on how to change the ASK LAMP-001 projector lamp for the ASK Impression A10 projector.

Alternate numbers

ASK Proxima LAMP-001 is also sold under the following parts:

403318
LAMP001
PR-LAMP-001
PR-LAMP001
PRLAMP-001
PRLAMP001

Looking for a less expensive option? Want more information? Watch our step-by-step video on replacing only the ASK Proxima LAMP-001 bulb instead of the entire lamp housing.

Tagged with: 403318, ASK Proxima Impression A10, ASK Proxima Impression A8, ASK Proxima Impression A9, ASK Proxima LAMP-001, authentic lamps, authentic projector lamps, genuine lamps, genuine projector lamps, lamp, lamp enclosure, Lamp replacement, LAMP001, PR-LAMP-001, PR-LAMP001, PRLAMP-001, PRLAMP001, Projector LAMP

Your quick guide to a new ASK Impression A9 projector lamp

Shelagh McNallyPosted on May 31, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Proxima Impression A9 Lamp indicator

ASK Proxima Impression A9 projector

The projector lamp for the ASK Impression A9 projector lamp will run for approximately 500 hours before needing to be replaced.

When the lamp is approaching end of life the Lamp Replacement Indicator will light up red.

To track the hours left in the ASK Impression A9 projector lamp go to the Main Menu and search under HELP, ABOUT.

Buying the right lamp

The correct lamp to use is the ASK LAMP-001. Be sure to install a genuine ASK LAMP-001 and avoid generic knock-off lamps. Even though they appear to be a bargain, these so-called “compatible” can end up costing more in the long run. These lamps are prone to explosion and have been created using the carcinogenic substance Krypton-85.

Using a counterfeit generic lamp can damage the sensitive components since these knock-off lamps have not been created with the correct components and can cause malfunction. The light provided by these lamps is also substandard with poor illumination.

Installing a generic lamp will also void any warranty for your ASK Impression A9 projector. Go with an authentic ASK LAMP-001 OEM lamp sold by a dependable seller. Learn the 7 Ways to spot a counterfeit lamp.

Replacing the ASK LAMP-001 lamp

Replace the ASK LAMP-001 immediately when the lamp replacement indicator blinks red.

1. Allow the ASK Impression A9 projector to cool down before replacing the ASK LAMP-001
2. Disconnect the power cord before opening the ASK Impression A9 lamp lid, found on the bottom of. the Impression A10 projector.
3. Unscrew the lamp lid. Once the lid has been opened, a safety switch will cut off the power supply to the ASK LAMP-001 lamp completely.
4. Unscrew the lamp holder.
5. Unfold the handles on the A ASK LAMP-001 lamp.
6. Pull out the old ASK LAMP-001 lamp cage.
7. Gently insert the new ASK LAMP-001 lamp all the way into the projector until it clicks into place.

8. Tighten the screw on the new ASK LAMP-001 lamp.
9. Fold the handle on the new lamp.
10. Place the lid back on and tighten the screw holding it in place.
You’re ready to reset the lamp timer on the ASK Impression A9.

NOTE: Be sure to dispose of the used ASK LAMP-001 lamp through a local recycling program. Don’t throw this lamp into regular garbage as it contains mercury and must be recycled properly.

Resetting the lamp timer

You’ll need to reset the lamp timer on the ASK Impression A8 in order to ensure the correct time is displayed.

To reset the lamp timer:
1. Go to OPTIONS on the main menu.
2. Scroll down to choose SERVICE. Press ENTER.
3. Scroll down to select LAMP TIMER RESET. Press ENTER.

Be sure to clean the air filters regularly to keep the projector from overheating and prolong the lamp life.

Looking for an even less expensive only try replacing the bare ASK LAMP-001 bulb instead of the entire lamp housing.

Watch our step-by-step video on replacing only the lamp.

Alternate numbers

ASK LAMP-001 is also sold under the following parts:

403318
LAMP001
PR-LAMP-001
PR-LAMP001
PRLAMP-001
PRLAMP001

Tagged with: ASK Proxima Impression A9 projector, ASK Proxima LAMP-001, authentic projector lamps, genuine projector lamps, Lamp replacement, projector, replacement lamps, replacement projector lamps

How to replace the ASK Impression A8 projector lamp

Shelagh McNallyPosted on May 30, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK LAMP-001

When the red indicator (found beside the lens) lights up, it’s time to replace the ASK Impression A8 projector lamp.

Wondering how many hours are left with the ASK LAMP-001? The hours can be found on the Main Menu under HELP, ABOUT.

Buying the right lamp

ASK Impression A8

Be sure to install the proper type of ASK LAMP-001 lamp. Even though they are cheaper in price, avoid buying generic knock-offs or lamps advertised as “compatible.” These lamps are prone to explosion and have been created using toxic substances such as Krypton-85.

Using a counterfeit generic lamp may result in poor illumination as well as malfunction of the sensitive components in your projector.

Installing a generic lamp will also void any warranty for your ASK Proxima Impression A8 projector. Go with an authentic ASK LAMP-001 OEM lamp sold by a dependable seller. Learn the 7 Ways to spot a counterfeit lamp.

Replacing the ASK LAMP-001 lamp

Replace the ASK LAMP-001 immediately when the lamp replacement indicator blinks red.

1. Allow the ASK Impression A8 projector to cool down before replacing the ASK LAMP-001
2. Disconnect the power cord before opening the ASK Proxima Impression A8 lamp lid, found on the bottom of. the Impression A10 projector.
3. Unscrew the lamp lid. Once the lid has been opened, a safety switch will cut off the power supply to the lamp completely.
4. Unscrew the lamp holder.
5. Unfold the handles on the ASK LAMP-001 lamp.
6. Pull out the old lamp cage.
7. Gently insert the new ASK LAMP-001 lamp all the way into the projector until it clicks into place.
8. Tighten the screw on the new lamp.
9. Fold the handle on the new lamp.
10. Place the lid back on and tighten the screw holding it in place.
You’re ready to reset the lamp timer on the ASK Impression A8.

Be sure to dispose of the used ASK LAMP-001 lamp through a local recycling program. Don’t throw this lamp into regular garbage as it contains mercury.

Resetting the lamp timer

You’ll need to reset the lamp timer on the ASK Impression A8 in order to ensure the correct time is displayed.

To reset the lamp timer:
1. Go to OPTIONS on the main menu.
2. Scroll down to choose SERVICE. Press ENTER.
3. Scroll down to select LAMP TIMER RESET. Press ENTER.

Clean the air filters regularly to keep the projector from overheating and prolong the lamp life.

Need more help? Watch our step-by-step video on replacing only the bare ASK LAMP-001 bulb instead of the entire lamp housing.

Alternate numbers

ASK LAMP-001 is also sold under the following parts:

403318
LAMP001
PR-LAMP-001
PR-LAMP001
PRLAMP-001
PRLAMP001

Tagged with: ASK Proxima Impression A8, ASK Proxima LAMP-001 lamp, authentic lamps, authentic projector lamps, genuine lamps, genuine projector lamps, lamp, Lamp replacement, Projector LAMP, replacement lamps

Replacing the ASK Impression A10 projector lamp

Shelagh McNallyPosted on May 30, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Proxima Impression proector

When it’s time to replace the projector lamp for the ASK Impression A10 projector, the red indicator located beside the lens will light up. To find the lamp life left for the ASK LAMP-001 go to HELP, ABOUT on the Main Menu.

Installing the right lamp

It’s crucial to install the proper type of ASK LAMP-001 lamp. Avoid buying generic knock-offs or lamps advertised as “compatible.” Go with an authentic ASK LAMP-001 OEM lamp sold by a dependable seller. Using a counterfeit generic lamp may result in poor illumination as well as malfunction of the sensitive components in your projector.

Counterfeit lamps are prone to explosion and have been created using toxic substances such as Krypton-85. Installing a generic lamp will also void any warranty for your ASK Impression A10 projector. Learn the 7 Ways to spot a counterfeit lamp.

Replacing the ASK LAMP-001 lamp

Replace the ASK LAMP-001 immediately when the lamp replacement indicator blinks red.

Allow the projector to cool down before replacing the ASK LAMP-001
Disconnect the power cord before opening the lamp lid, found on the bottom of the Impression A10 projector.
Unscrew the lamp lid on the ASK Impression A10. Once the lid has been opened, a safety switch will cut off the power supply to the lamp completely.
Unscrew the lamp holder.
Unfold the handles on the ASK LAMP-001 lamp.
Pull out the old lamp cage. Gently insert the new ASK LAMP-001 lamp all the way into the projector until it clicks into place.

Tighten the screw on the new ASK LAMP-001 lamp.
Fold the handle on the new ASK LAMP-001 lamp.
Place the lid back on and tighten the screw holding it in place.
You’re ready to reset the lamp timer.

NOTE: Clean the air filters regularly to keep the projector from overheating and prolong the lamp life.

Be sure to dispose of the used ASK LAMP-001 lamp through a local recycling program. Don’t throw this lamp into regular garbage as it contains mercury.

Resetting the lamp timer

You’ll need to reset the lamp timer in order to ensure the correct time is displayed.

To reset the lamp timer:
Go to OPTIONS on the main menu.
Scroll down to choose SERVICE. Press ENTER.
Scroll down to select LAMP TIMER RESET. Press ENTER.