We're now Screen and Projector! For updated content, visit ScreenAndProjector.com and follow @screenandproj on social media!
Home › About Us › Page 95

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson- PowerLite-Pro-Cinema-9100-projector-Epson- ELPLP49-lampFollow our guide to replace the Epson PowerLite Pro Cinema 9100 projector lamp

Buy authentic

It can be confusing trying to find the properEpson PowerLite Pro Cinema 9100 projector lamp. The Internet has been flooded with companies offering “compatible” generic lamps at bargain prices. These are NOT authentic lamps and should be avoided for the following reasons:

The few dollars you save with generic “compatible” lamps is not worth it in the long run. Save yourself unnecessary headaches and buy an Epson ELPLP49 lamp  from a recognized dealer. You’ll be getting a far superior product with a replacement guarantee and tech support.

Find this authentic lamp on Amazon sold by these authorized dealers:

Know when to replaceEpson-ELPLP49-Lamp-Light

Watch for the signs that it’s time to replace the Epson ELPLP49 projector lamp:

  • The projector image gets darker and starts to deteriorate.
  • The projector lamp flashes red.
  • The warning message REPLACE THE LAMP appears on screen.

A replacement warning message will also appear on screen. You can expect 4000 hours of lamp from the lamp depending on the settings and usage.

Step 3: Install a new Epson lamp

Before installation:

  • Turn power button off wait for light to stop flashing
  • Turn off power swtich on the back of the Epson PowerLite Pro Cinema 9100 projector
  • Unplug the power cord
  • Allow the Epson PowerLite Pro Cinema 9100 to cool for one hour – it should be cool to the touch. Inside of the projector can be very hot since these machines operator under high temperatures and you run the risk of being burned if the projector has not cooled down.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

 

Epson- PowerLite-Pro-Cinema-9100- projector-Epso- ELPLP49-lamp1. The lamp cover for the Epson PowerLite Pro Cinema 9100 is found on top of the projector. Take the screwdriver that came with the projector and put it into opening on the lamp cover to release the cover switch. Remove the lamp cover.

Epson- PowerLite-Pro-Cinema-9100- projector-remove-scews-Epson ELPLP49-lamp

2. Remove the two screws on either side of Epson ELPLP49 lamp. Place the screws to either side.

Epson- PowerLite-Pro-Cinema-9100- projector-remove-Epson ELPLP49-lamp

3. Pull the lamp out using the top handle. Be sure to pull it out straight. Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb shatter.

NOTE: The Epson ELPLP49 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! 

Epson- PowerLite-Pro-Cinema-9100- projector-install-lamp-Epson ELPLP49-lamp

4. Take the new Epson ELPLP49 lamp by the handle and gently put it into place making sure the lamp is facing in the right direction.

Epson- PowerLite-Pro-Cinema-9100- projector-tighten-lamp-Epson ELPLP49-lamp

5. Replace the Epson ELPLP49 screws on the newly installed lamp.

Epson- PowerLite-Pro-Cinema-9100- projector-lamp-cover-on-Epson ELPLP49-lamp

6. Re-connect the lamp cover. Tighten the screws on the cord and turn on the Epson PowerLite Pro Cinema 9100 projector.

7. Re-attach the power cord. Turn the projector on and let it warm up.

8. Reset the Lamp Operating time.

Reset the Epson Lamp Timer

Reset the Epson PowerLite Pro Cinema 9100 Lamp Replacement Counter only when the Epson ELPLP49 lamp has been replaced.

Epson- PowerLite-Pro-Cinema-9100- projector-reset-lamp-counter-menu1-Epson- ELPLP49-lamp

  • Turn the Epson PowerLite Pro Cinema 9100 projector on.
  • Press MENU to display the configuration menu.
  • Press the down arrow to move down the menu to the Reset option.

pson- PowerLite-Pro-Cinema-9100- projector-reset-lamp-counter-menu2-Epson- ELPLP49-lamp

  • Press Enter to enter the Reset Menu.
  • Press the down arrow to move down the menu to the Reset Lamp Hours option.
  • Press Enter.

PowerLite-Pro-Cinema-9100- projector-reset-lamp-counter-menu3-Epson- ELPLP49-lamp

  • When the Reset Lamp Hour option has been chosen the Reset Lamp Hours message will appear.
  • Use the cursor to move to the YES option.
  • Press Enter to reset the lamp hours to zero.

Prolong the life of the Epson ELPLP49 lamp:

Extend the life of the newly installed Epson ELPLP49 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson PowerLite Pro Cinema 9100 and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson- PowerLite-Pro-Cinema-7500-UB- projector-Epso- ELPLP49-lampFollow our 3-step guide to change the Epson PowerLite Pro Cinema 7500 UB projector lamp

Its easy to install a new Epson PowerLite Pro Cinema 7500 UB projector lamp when you follow this simple guide.

Step 1: Know when to replaceEpson-ELPLP49-Lamp-Light

Watch for the signs that it’s time to replace the Epson PowerLite Pro Cinema 7500 UB projector lamp :

  • The projector image gets darker and starts to deteriorate.
  • The projector lamp flashes red.
  • The warning message REPLACE THE LAMP appears on screen.

A replacement warning message will also appear on screen. You can expect 4000 hours of lamp from the lamp depending on the settings and usage.

Protect your projector with original lamps

Only genuine PowerLite Pro Cinema 7500 UB projector lamp should be used in order to keep your projector is good working order. You’ll need an authentic Epson ELPLP49, which has been manufactured to meet the specifications of the PowerLite Pro Cinema 7500 UB projector.

Knock-off lamps may seem like a bargain due to their low prices but these counterfeit lamps can damage the sensitive and expensive mechanisms in your PowerLite Pro Cinema 7500 UB projector. They are also prone to explosions and actually have a much shorter working life that authentic lamps due to the inferior materials used during their production. Even more troubling are the toxic, carcinogenic materials you are exposed to after installing one of these generic lamps. Installing a knock-off lamp will also void the guarantee on your PowerLite Pro Cinema 7500 UB leaving you unprotected should anything happen after installation. Avoid hassles and buy Epson ELPLP49 projector lamps from an authorized dealer.

Learn the 7 Ways to spot a counterfeit lamp.

Find this authentic lamp on Amazon sold by these authorized dealers:

Installing a new lamp

Before installation:

  • Turn power button off wait for light to stop flashing
  • Turn off power swtich on the back of the Epson PowerLite Pro Cinema 7500 UB projector
  • Unplug the power cord
  • Allow the Epson PowerLite Pro Cinema 7500 UB to cool for one hour – it should be cool to the touch. Inside of the projector can be very hot since these machines operator under high temperatures and you run the risk of being burned if the projector has not cooled down.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

Epson- PowerLite-Pro-Cinema-7500-UB- projector-Epso- ELPLP49-lamp1. The lamp cover for the Epson PowerLite Pro Cinema 7500 UB.
is found on top of the projector. Take the screwdriver that came with the projector and put it into opening on the lamp cover to release the cover switch. Remove the lamp cover.

Epson- PowerLite-Pro-Cinema-7500-UB- projector-remove-scews-Epson ELPLP49-lamp

2. Remove the two screws on either side of Epson ELPLP49 lamp. Place the screws to either side.

 

Epson- PowerLite-Pro-Cinema-7500-UB- projector-remove-Epson ELPLP49-lamp

 

3. Pull the lamp out using the top handle. Be sure to pull it out straight. Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb shatter.

NOTE: The Epson ELPLP49 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Epson- PowerLite-Pro-Cinema-7500-UB- projector-install-lamp-Epson ELPLP49-lamp

4, Take the new Epson ELPLP49 lamp by the handle and gently put it into place making sure the lamp is facing in the right direction.

Epson- PowerLite-Pro-Cinema-7500-UB- projector-tighten-lamp-Epson ELPLP49-lamp

 

 

5. Replace the Epson ELPLP49 screws on the newly installed lamp.

Epson- PowerLite-Pro-Cinema-7500-UB- projector-lamp-cover-on-Epson ELPLP49-lamp

 

 

6. Re-connect the lamp cover. Tighten the screws on the cord and turn on the Epson PowerLite Pro Cinema 7500-UB projector.

7. Re-attach the power cord. Turn the projector on and let it warm up.

8. Reset the Lamp Operating time.

Reset the Epson Lamp Timer

Reset the Epson PowerLite Pro Cinema 7500 UB Lamp Replacement Counter only when the Epson ELPLP49 lamp has been replaced.

Epson- PowerLite-Pro-Cinema-710- projector-reset-lamp-counter-menu1-Epson- ELPLP49-lamp

  • Turn the Epson PowerLite Pro Cinema 7500 UB projector on.
  • Press MENU to display the configuration menu.
  • Press the down arrow to move down the menu to the Reset option.

pson- PowerLite-Pro-Cinema-710- projector-reset-lamp-counter-menu2-Epson- ELPLP49-lamp

  • Press Enter to enter the Reset Menu.
  • Press the down arrow to move down the menu to the Reset Lamp Hours option.
  • Press Enter.

PowerLite-Pro-Cinema-710- projector-reset-lamp-counter-menu3-Epson- ELPLP49-lamp

  • When the Reset Lamp Hour option has been chosen the Reset Lamp Hours message will appear.
  • Use the cursor to move to the YES option.
  • Press Enter to reset the lamp hours to zero.

Prolong the life of the Epson ELPLP49 lamp:

Extend the life of the newly installed Epson ELPLP49 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson PowerLite Pro Cinema 7500 UB and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Rear Projection TV Lamp Replacement — No Comments ↓

Mitsubishi-915B455011- 915B455A11-Lamp

Watch for the telltale signs of a dimmer picture or colours that appear off to know when it’s time for a new Mitsubishi lamp in your RPTV.

When the Mitsubishi 915B455011/915B455A11 lamp is no longer working the Status Light on the front of the Mitsubishi RPTV will begin blinking red.

When the TV is operating normally, this indicator will not be lit. When has turned RED, the lamp has burnt out and since this is the only source of light for the RPTV, it will not turn on. Replace the Mitsubishi 915B455011/915B455A11 lamp immediately.

Avoid buying generic lamps got with authentic Mitsubishi 915B455011/915B455A11 lamp. You’ll be getting a better lamp that will keep your Mitsubishi RPTV working at optimum levels.

6 reasons to avoid generics

Learn the 7 Ways to spot a counterfeit lamp.

Compatible Projectors

The Mitsubishi 915B455011/915B455A11 lamp is compatible with the following models:

Mitsubishi WD-73C12, Mitsubishi WD-82C12, Mitsubishi WD-73642, Mitsubishi WD-82642, Mitsubishi WD-73742, Mitsubishi WD-73842, Mitsubishi WD-82742, Mitsubishi WD-82842, Mitsubishi WD-92742, Mitsubishi WD-92842, Mitsubishi WD-92A12.

See below for step-by-step instructions on replacing the Mitsubishi 915B455011/915B455A11 lamp for individual models.

Mitsubishi WD-737422 RPTV, Mitsubishi 915B455011 / 915B455A11 Lamp

Click here for step-by-step instructions on how to change the Mitsubishi 915B455011/915B455A11 RPTV lamp for the Mitsubishi WD-73742 RPTV.

 

 

 

Mitsubishi WD-73842 Mitsubishi 915B455011 / 915B455A11 Lamp

 

Click here for step-by-step instructions on how to change the Mitsubishi 915B455011/915B455A11 RPTV lamp for the Mitsubishi WD-73842 RPTV.

 

 

 

 

 

 

Mitsubishi WD-82742 Mitsubishi 915B455011 / 915B455A11 Lamp

Click here for step-by-step instructions on how to change the Mitsubishi 915B455011/915B455A11 RPTV lamp for the Mitsubishi WD-82742 RPTV.

Mitsubishi WD-82842 Mitsubishi 915B455011 / 915B455A11 Lamp

 

 

 

Click here for step-by-step instructions on how to change the Mitsubishi 915B455011/915B455A11 RPTV lamp for the Mitsubishi WD-82842 RPTV.

 

 

 

 

 

 

Mitsubishi WD-92742 Mitsubishi 915B455011 / 915B455A11 Lamp

Click here for step-by-step instructions on how to change the Mitsubishi 915B455011/915B455A11 RPTV lamp for the Mitsubishi WD-92742 RPTV.

 

 

 

 

 

 

Mitsubishi WD-92842, Mitsubishi 915B455011 / 915B455A11 Lamp

 

 

Click here for step-by-step instructions on how to change the Mitsubishi 915B455011/915B455A11 RPTV lamp for the Mitsubishi WD-92842  RPTV.

 

 

 

 

 

 

Mitsubishi WD-92A12, Mitsubishi 915B455011 / 915B455A11 Lamp

 

 

Click here for step-by-step instructions on how to change the Mitsubishi 915B455011/915B455A11 RPTV lamp for the Mitsubishi WD-92A12 RPTV.

 

 

 

 

 

 

Learn how to extend the Mitsubishi 915B455011 / 915B455A11 Lamp by reading 7 Tips for extending RPTV lamp life.

 

 

 

Tagged with: , , , , , , , , , , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Rear Projection TV Lamp Replacement — No Comments ↓

Mitsubishi WD-92842, Mitsubishi 915B455011 / 915B455A11 Lamp

When the picture on your Mitsubishi WD-73C12 RPTV becomes dimmer it’s time to replace the lamp.

Follow this step-by-step guide for replacing the Mitsubishi 915B455011/915B455A11 lamp.

When the lamp is no longer working the Status Light on the front of the Mitsubishi WD-92842 panel will begin blinking red.

Since the 915B455011 / 915B455A11 lamp is the only source of light for the TV when it has reached its end of life, the Mitsubishi WD-92842 will not turn on.

Invest in an authentic lamp

Buy your Mitsubishi 915B455011/915B455A11 lamp from an authorized manufacturer and avoid the lower-priced generic lamps. These knock-off lamps are made with inferior, counterfeit parts that can damage the sensitive mechanisms in your Mitsubishi WD-92842 RPTV. These generic lamps advertise as compatible but may end up costing you more since they have a shorter lamp and are prone to explosions. Buying an authentic lamp from a legitimate source keeps your projector under warranty and gives you a solid guarantee that the lamp you are installing is suitable for your projector.

Learn the 7 Ways to spot a counterfeit lamp.

Installing the new Mitsubishi 915B455011/915B455A11

Before installation: Turn off the TV and allow it to cool for one hour. Failure to do so can put you at risk of burning yourself since the Mitsubishi WD-92842 operates under high heat.

Mitsubishi WD-92842 location of panel, Mitsubishi 915B455011 / 915B455A11 Lamp

 

  • After TV has cooled, turn the TV around to access the lamp cover located at the back of the Mitsubishi WD-92842 RPTV.

Mitsubishi WD-92842 lamp cover off, Mitsubishi 915B455011 / 915B455A11 Lamp

  • Using a #2 Philips screwdriver, loosen the screw holding the cover in place. Put the cover to one side.

 

 

 

 

Mitsubishi WD-92842 lamp screw rempved, Mitsubishi 915B455011 / 915B455A11 Lamp

  • Loosen the screw securing the lamp cartridge, releasing it from the mating threads. This is a captive screw so it will not be separated the lamp cartridge.)
  • When the screw is loosened, gently grasp the handle on the lamp cartridge and pull the lamp straight out. DO NOT TILT, as there may be glass fragments that will fall inside the TV.
  • If this happens, carefully pick up the larger shards wearing rubber gloves. Take a cloth just damp enough to pick up the small shreds. It’s important to pick up the broken lamps since this lamps does have mercury. Read more about proper clean-up from the EPA.
  • Learn what to do should the bulb shatter.
  • Take out the bag supplied with your new lamp and open it up. You’ll store the old lamp in this bag.
  • Put the old lamp gently into the opened bag. Close the bag.
  • Gently slide in the new Mitsubishi 915B455011 / 915B455A11 Lamp into the slot, making sure not to tile the lamp.
  • Tighten the screw in the lamp.
  • Replace the cover and tighten the screws.

NOTE: The Mitsubishi 915B455011 / 915B455A11 Lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer, they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Learn how to extend the Mitsubishi 915B455011 / 915B455A11 lamp life by reading 7 Tips for extending RPTV lamp life.

Tagged with: , , , , , , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Rear Projection TV Lamp Replacement — No Comments ↓

Mitsubishi WD-92742 Mitsubishi 915B455011 / 915B455A11 Lamp

Follow this 3-step guide for replacing the lamp in your Mitsubishi WD-92742 RPTV. You’ll need a a new Mitsubishi 915B455011/915B455A11 Lamp.

Step 1: Know when to replace

Wondering when to replace the Mitsubishi WD-92742 RPTV? Watch for the telltale signs of a dimmer picture on screen or colours that appear off. When the Mitsubishi 915B455011/915B455A11 lamp is no longer working the Status Light on the front of the Mitsubishi WD-92742 RPTV will begin blinking red.

Replace the Mitsubishi 915B455011/915B455A11 lamp immediately.

Find this lamp sold on Amazon by these authorized distributors:

Tagged with: , , , , , , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Rear Projection TV Lamp Replacement — No Comments ↓

Mitsubishi WD-92A12, Mitsubishi 915B455011 / 915B455A11 LampRed light blinking? Picture dimmer? Replace your Mitsubishi WD-92A12 RPTV lamp.

Follow our quick guide for easy replacement of the Mitsubishi 915B455011/ 915B455A11 lamp for the Mitsubishi WD-92A12 RPTV.

Replacement warnings

Watch for the telltale signs of a dimmer picture on screen or colours that appear off. When the lamp is no longer working the Status Light on the front of the Mitsubishi WD-73642 panel will begin blinking red.

Replace the Mitsubishi 915B455011 / 915B455A11 lamp immediately.

The importance of authentic

When it’s time to change your Mitsubishi 915B455011/ 915B455A11 lamp, it’s important to buy only a genuine lamp to replace the old lamp. The price of counterfeit knock-off lamps may be tempting but can cost you more money in the long run. Counterfeit lamps are not manufactured according to Epson’s specifications and can damage the sensitive (and expensive) mechanisms in your Mitsubishi WD-92A12 RPTV projector.

Buy a Mitsubishi 915B455011/ 915B455A11 lamp from a recognized dealer to get a far superior product with a replacement guarantee and tech support. Learn the 7 Ways to spot a counterfeit lamp.

6 reasons to avoid generics

Learn the 7 Ways to spot a counterfeit lamp.

Installing the new Mitsubishi 915B455011 / 915B455A11

Before installation: Turn off the TV and allow it to cool for one hour. Failure to do so can put you at risk of burning yourself since the Mitsubishi WD-92A12 operates under high heat.

Mitsubishi WD-92A12 location of panel, Mitsubishi 915B455011 / 915B455A11 Lamp

 

  • After TV has cooled, turn the TV around to access the lamp cover located at the back of the Mitsubishi WD-92A12 RPTV.

Mitsubishi WD-92A12 lamp cover off, Mitsubishi 915B455011 / 915B455A11 Lamp

  • Using a #2 Philips screwdriver, loosen the screw holding the cover in place. Put the cover to one side.

 

 

 

 

Mitsubishi WD-92A12 lamp screw rempved, Mitsubishi 915B455011 / 915B455A11 Lamp

  • Loosen the screw securing the lamp cartridge, releasing it from the mating threads. This is a captive screw so it will not be separated the lamp cartridge.)
  • When the screw is loosened, gently grasp the handle on the lamp cartridge and pull the lamp straight out. DO NOT TILT, as there may be glass fragments that will fall inside the TV.
  • If this happens, carefully pick up the larger shards wearing rubber gloves. Take a cloth just damp enough to pick up the small shreds. It’s important to pick up the broken lamps since this lamps does have mercury. Read more about proper clean-up from the EPA.
  • Learn what to do should the bulb shatter.
  • Take out the bag supplied with your new lamp and open it up. You’ll store the old lamp in this bag.
  • Put the old lamp gently into the opened bag. Close the bag.
  • Gently slide in the new Mitsubishi 915B455011 / 915B455A11 Lamp into the slot, making sure not to tile the lamp.
  • Tighten the screw in the lamp.
  • Replace the cover and tighten the screws.

NOTE: The Mitsubishi 915B455011 / 915B455A11 Lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer, they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Learn how to extend the Mitsubishi 915B455011 / 915B455A11 Lamp by reading 7 Tips for extending RPTV lamp life.

 

Tagged with: , , , , , , , , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson PowerLite Home Cinema 8500 UB, Epson ELPLP49Changing the Epson PowerLite Home Cinema 8500 UB projector lamp is easy

Follow our 3-step guide for quick and easy replacement of the Epson PowerLite Home Cinema 8500 UB. It will take less than 10 minutes to get.

Note: These instructions can also be used for the Epson Ensemble Home Cinema 8500 UB

Step 1: Know when to replace

Watch for the signs that it’s time to replace the projector lamp:Epson-PowerLite-Home-Cinema-8500 UB, Epson ELPLP49

  • The projector image gets darker and starts to deteriorate.
  • The projector lamp flashes red.
  • The warning message REPLACE THE LAMP appears on screen.

A replacement warning message will also appear on screen. You can expect 4000 hours of lamp from the lamp depending on the settings and usage.

Step 2: Buy the right lamp

You’ll want to install an authentic Epson ELPLP49 lamp to keep your PowerLite Home Cinema 8500 UB projector working properly and to get the best picture quality. Although cheaper at first, generic knock-off lamps are actually not that great a bargain. These so-called “compatible” lamps are prone to explosion, have poor illumination, a shorter lamp life and can cause permanent damaged to the sensitive electronic components in your Epson PowerLite Home Cinema 8500 UB projector.

Find this authentic lamp on Amazon sold by these authorized dealers:

6 reasons to avoid generics

Learn the 7 Ways to spot a counterfeit lamp.

Step 3: Install a new lamp

Before installation:

  • Turn power button off wait for light to stop flashing
  • Turn off power swtich on the back of the Epson PowerLite Home Cinema 8500 UB projector
  • Unplug the power cord
  • Allow the Epson PowerLite Home Cinema 8500 UB to cool for one hour – it should be cool to the touch. Inside of the projector can be very hot since these machines operator under high temperatures and you run the risk of being burned if the projector has not cooled down.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

 

Epson PowerLite Home Cinema 8500 UB lamp cover, Epson ELPLP49 lamp1. The lamp cover for the Epson PowerLite Home Cinema 8500 UB
is found on top of the projector. Take the screwdriver that came with the projector and put it into opening on the lamp cover to release the cover switch. Remove the lamp cover.

Epson PowerLite Home Cinema 8500 UB screws removed, Epson ELPLP49 lamp

2. Remove the two screws on either side of Epson ELPLP49 lamp. Place the screws to either side.

Epson PowerLite Home Cinema 8500 UB remove lamp, Epson ELPLP49 lamp

3. Pull the lamp out using the top handle. Be sure to pull it out straight. Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb shatter.

NOTE: The Epson ELPLP49 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! 

Epson PowerLite Home Cinema 8500 UB projector, Epson ELPLP49 lamp

4. Take the new Epson ELPLP49 lamp by the handle and gently put it into place making sure the lamp is facing in the right direction.

Epson PowerLite Home Cinema 8500 UB tighten screws, Epson ELPLP49 lamp

 

5. Replace the Epson ELPLP49 screws on the newly installed lamp.

Epson PowerLite Home Cinema 8500 UB lamp cover reinstalled, Epson ELPLP49 lamp

6. Re-connect the lamp cover. Tighten the screws on the cord and turn on the Epson PowerLite Home Cinema 8500 UB projector.

7. Re-attach the power cord. Turn the projector on and let it warm up.

8. Reset the Lamp Operating time.

Reset the Epson Lamp Timer

Reset the Epson PowerLite Home Cinema 8500 UB Lamp Replacement Counter only when the Epson ELPLP49 lamp has been replaced.

Epson PowerLite Home Cinema 8500 UB reset lamp timer, Epson ELPLP49 lamp

  • Turn the Epson PowerLite Home Cinema 8500 UB
    projector on.
  • Press MENU to display the configuration menu.
  • Press the down arrow to move down the menu to the Reset option.

Epson PowerLite Home Cinema 8500 UB reset menu, Epson ELPLP49 lamp

  • Press Enter to enter the Reset Menu.
  • Press the down arrow to move down the menu to the Reset Lamp Hours option.
  • Press Enter.

Epson PowerLite Home Cinema 8500 UB lamp reset, Epson ELPLP49 lamp

  • When the Reset Lamp Hour option has been chosen the Reset Lamp Hours message will appear.
  • Use the cursor to move to the YES option.
  • Press Enter to reset the lamp hours to zero.

Prolong the life of the Epson ELPLP49 lamp:

Extend the life of the newly installed Epson ELPLP49 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson PowerLite Home Cinema 8500 UB and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson PowerLite Home Cinema 8100, Epson ELPLP49That red blinking light means it’s time for a new Epson PowerLite Home Cinema 8100 projector lamp

A replacement warning message will also appear on screen. Replace the lamp immediately and don’t wait. Follow this guide to install a new Epson PowerLite Home Cinema 8100 projector lamp.

Buy the right lamp

You can expect 4000 hours of lamp from the lamp depending on the settings and usage of the Epson PowerLite Home Cinema 8100 and whether you have bought an authentic lamp.

The Internet has been flooded with generic lamps stating they are “compatible” with Epson projectors. However most generics have a shorter lamp life than original lamps. Consider the source of your lamp. purchasing. Look for a registered OEM manufacturer who is building the compatible lamps in North America and using the correct materials. All the compatible “generic” lamps from overseas are are created with toxic materials and carcinogenic parts including Krypton-85. Chinese produced lamps may have a cheaper price tag but in the long run cost more since they are knock off lamps are prone to explosions.

Epson PowerLite Home Cinema 8100, Epson ELPLP49Buying from an authentic manufacturer guarantees a projector lamp that works properly with your Epson PowerLite Home Cinema 8100. Too often generic lamps damage the sensitive electronics in your projectors and since installing them voids your warranty you have no recourse.

Buy authentic and get a better product plus better customer care.

Find this authentic lamp on Amazon sold by these authorized dealers:

How to install a new Epson ELPLP49 lamp

Before installation:

  • Turn off the projector and unplug the AC cord.
  • Allow the Epson PowerLite Home Cinema 8100 to cool for one hour – it should be cool to the touch. Inside of the projector can be very hot since these machines operator under high temperatures and you run the risk of being burned if the projector has not cooled down.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

 

Epson PowerLite Home Cinema 8100 lamp cover, Epson ELPLP49 lamp1. The lamp cover for the Epson PowerLite Home Cinema 8100 is found on top of the projector. Take the screwdriver that came with the projector and put it into opening on the lamp cover to release the cover switch. Remove the lamp cover.

Epson PowerLite Home Cinema 8100 remove lamp, Epson ELPLP49 lamp

2. Remove the two screws on either side of Epson ELPLP49 lamp. Place the screws to either side.

Epson PowerLite Home Cinema 8100 remove lamp, Epson ELPLP49 lamp

 

3. Pull the lamp out using the top handle. Be sure to pull it out straight. Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb shatter.

NOTE: The Epson ELPLP49 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! 

Epson PowerLite Home Cinema 8100 install lamp, Epson ELPLP49 lamp

4, Take the new Epson ELPLP49 lamp by the handle and gently put it into place making sure the lamp is facing in the right direction.

Epson PowerLite Home Cinema 8100 tighten lamp screws, Epson ELPLP49 lamp

5. Replace the Epson ELPLP49 screws on the newly installed lamp.

Epson PowerLite Home Cinema 8100 cover on, Epson ELPLP49 lamp

6. Re-connect the lamp cover. Tighten the screws on the cord and turn on the Epson PowerLite Home Cinema 8100 projector.

7. Re-attach the power cord. Turn the projector on and let it warm up.

8. Reset the Lamp Operating time.

Step 3: Reset the Epson Lamp Timer

Reset the Epson PowerLite Home Cinema 8100 Lamp Replacement Counter only when the Epson ELPLP49 lamp has been replaced.

Epson PowerLite Home Cinema 8100 lamp reset timer, Epson ELPLP49 lamp

  • Turn the Epson PowerLite Home Cinema 8100 projector on.
  • Press MENU to display the configuration menu.
  • Press the down arrow to move down the menu to the Reset option.

Epson PowerLite Home Cinema 8100 lamp reset second screen, Epson ELPLP49 lamp

  • Press Enter to enter the Reset Menu.
  • Press the down arrow to move down the menu to the Reset Lamp Hours option.
  • Press Enter.

Prolong the life of the Epson ELPLP49 lamp:

Extend the life of the newly installed Epson ELPLP49 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson PowerLite Home Cinema 8100 and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — 2 Comments ↓

Epson Home Cinema 8700 UB projector, Epson ELPLP49

Dark Screen? Flashing red light? It’s time to replace the Epson PowerLite Home Cinema 8700 UB projector lamp

Step 1: When to replace

Epson PowerLite Home Cinema 8350, Epson ELPLP49Watch for the signs that it’s time to replace the Epson ELPLP49 projector lamp:

  • The projector image gets darker and starts to deteriorate.
  • The projector lamp flashes red.
  • The warning message REPLACE THE LAMP appears on screen.

You can expect 4000 hours of life from the lamp depending on the settings and usage.

Step 2: Buy the right projector lamp

The Internet has been flooded with counterfeit projector lamps stating they are “compatible” with Epson projectors. However most generics have a shorter lamp life than original lamps. Consider the source of your lamp. purchasing. Look for a registered OEM manufacturer wusing the correct materials. Many from overseas counterfeits are created with toxic materials and carcinogenic parts. Despite the cheaper price tag these lamps actually cost more since they are prone to explosions and have a much shorter life.

Buying from an authentic manufacturer guarantees a projector lamp that works properly with your Epson PowerLite Home Cinema 8700 UB. Too often, after counterfeit projector lamps have damages the sensitive electronics in your projector it’s too late for refunds and your warranty has become void.

Buy authentic and keep your Epson PowerLite Home Cinema 8700 UB running at its optimum levels.

Find this authentic lamp on Amazon sold by these authorized dealers:

Step 3: Install a new Epson ELPLP49 lamp

Before installation:

  • Turn power button off wait for light to stop flashing
  • Turn off power switch on the back of the Epson PowerLite Home Cinema 8700 UB projector
  • Unplug the power cord
  • Allow the Epson PowerLite Home Cinema 6100 to cool for one hour – it should be cool to the touch. Inside the projector can be very hot since these machines operator under high temperatures and you run the risk of being burned if the projector has not cooled down.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

Epson PowerLite Home Cinema 8700 UB lamp cover, Epson ELPLP49 lamp1. The projector lamp cover for the Epson PowerLite Home Cinema 8700 UB is found on top of the projector. Take the screwdriver that came with the projector and put it into opening on the lamp cover to release the cover switch. Remove the projector lamp cover.

 

Epson PowerLite Home Cinema 8700 UB screws removed, Epson ELPLP49 lamp

2. Remove the two screws on either side of Epson ELPLP49 projector lamp. Place the screws to either side.

Epson PowerLite Home Cinema 8700 UB remove lamp, Epson ELPLP49 lamp

 

3. Pull the projector lamp out using the top handle. Be sure to pull it out straight. Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb shatter.

NOTE: The Epson ELPLP49 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Epson PowerLite Home Cinema 8700 UB projector, Epson ELPLP49 lamp

4. Take the new Epson ELPLP49 projector lamp by the handle and gently put it into place making sure the lamp is facing in the right direction.

Epson PowerLite Home Cinema 8700 UB tighten screws, Epson ELPLP49 lamp

5. Replace the Epson ELPLP49 screws on the newly installed lamp.

Epson PowerLite Home Cinema 8700 UB lamp cover reinstalled, Epson ELPLP49 lamp

 

6. Re-connect the projector lamp cover. Tighten the screws on the cord and turn on the Epson PowerLite Home Cinema 8700 UB projector.

7. Re-attach the power cord. Turn the projector on and let it warm up.

8. Reset the Lamp Operating time.

Reset the Epson Projector Lamp Timer

Reset the Epson PowerLite Home Cinema 8700 UB Lamp Replacement Counter only when the Epson ELPLP49 projector lamp has been replaced.

 

Epson PowerLite Home Cinema 8700 UB reset lamp timer, Epson ELPLP49 lamp

  • Turn the Epson PowerLite Home Cinema 8700 UB projector on.
  • Press MENU to display the configuration menu.
  • Press the down arrow to move down the menu to the Reset option.

Epson PowerLite Home Cinema 8700 UB reset menu, Epson ELPLP49 lamp

  • Press Enter to enter the Reset Menu.
  • Press the down arrow to move down the menu to the Reset Lamp Hours option.
  • Press Enter.

 

Epson PowerLite Home Cinema 8700 UB lamp reset, Epson ELPLP49 lamp

  • When the Reset Lamp Hour option has been chosen the Reset Lamp Hours message will appear.
  • Use the cursor to move to the YES option.
  • Press Enter to reset the lamp hours to zero.

Prolong the life of the Epson ELPLP49 projector lamp:

Extend the life of the newly installed Epson ELPLP49 projector lamp with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson PowerLite Home Cinema 8700 UB and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Rear Projection TV Lamp Replacement — No Comments ↓

Mitsubishi WD-82842 Mitsubishi 915B455011 / 915B455A11 Lamp

Replacing the lamp in your Mitsubishi WD-82842 RPTV is easy as 1-2-3.

Follow our step-by-step to install a new Mitsubishi 915B455011/915B455A11 Lamp.

Step 1: Know when to replace

Wondering when to replace the Mitsubishi WD-82842 RPTV? Watch for the telltale signs of a dimmer picture on screen or colours that appear off. When the Mitsubishi 915B455011/915B455A11 lamp is no longer working the Status Light on the front of the Mitsubishi WD-82842 RPTV will begin blinking red. Replace the Mitsubishi 915B455011/915B455A11 lamp immediately.

Step 2: Buy the right type of lamp

Although generic lamps may appear to be a bargain, you should purchase your Mitsubishi 915B455011/915B455A1 lamp from an authorized manufacturer These knock-off lamps are made with inferior, counterfeit parts that can damage the sensitive mechanisms in your Mitsubishi WD-82842 RPTV. These generic lamps advertise as compatible but may end up costing you more since they have a shorter lamp and are prone to explosions. Buying an authentic lamp from a legitimate source keeps your projector under warranty and gives you a solid guarantee that the lamp you are installing is suitable for your projector. Learn the 7 Ways to spot a counterfeit lamp.

Step 3: Installing the new Mitsubishi 915B455011/915B455A11

Before installation: Turn off the TV and allow it to cool for one hour. Failure to do so can put you at risk of burning yourself since the Mitsubishi WD-82842 RPTV operates under high heat. Mitsubishi WD-82842 RPTV location of panel, Mitsubishi 915B455011 / 915B455A11 Lamp

  • After TV has cooled, turn the TV around to access the lamp cover located at the back of the Mitsubishi WD-82842 RPTV

Mitsubishi WD-82842 RPTV lamp cover off, Mitsubishi 915B455011 / 915B455A11 Lamp

  • Using a #2 Philips screwdriver, loosen the screw holding the cover in place. Put the cover to one side.

Mitsubishi WD-82842 RPTV lamp screw rempved, Mitsubishi 915B455011 / 915B455A11 Lamp

  • Loosen the screw securing the lamp cartridge, releasing it from the mating threads. This is a captive screw so it will not be separated the lamp cartridge.)
  • When the screw is loosened, gently grasp the handle on the lamp cartridge and pull the lamp straight out. DO NOT TILT, as there may be glass fragments that will fall inside the TV.
  • If this happens, carefully pick up the larger shards wearing rubber gloves. Take a cloth just damp enough to pick up the small shreds. It’s important to pick up the broken lamps since this lamps does have mercury. Read more about proper clean-up from the EPA.
  • Learn what to do should the bulb shatter.
  • Take out the bag supplied with your new lamp and open it up. You’ll store the old lamp in this bag.
  • Put the old lamp gently into the opened bag. Close the bag.
  • Gently slide in the new Mitsubishi 915B455011 / 915B455A11 Lamp into the slot, making sure not to tile the lamp.
  • Tighten the screw in the lamp.
  • Replace the cover and tighten the screws.

NOTE: The Mitsubishi 915B455011 / 915B455A11 Lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer, they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Learn how to extend the Mitsubishi 915B455011 / 915B455A11 Lamp by reading 7 Tips for extending RPTV lamp life.

Tagged with: , , , , , , , ,
Join the discussion on Facebook! All your questions, answered! The Screen & Projector Group