Your Sanyo PLC-XF20 projector is equipped with four projector lamps. This guide shows you how to replace them Signs of end of projector lamp There is a Lamp Replace Indicator at the front and at the back of the Sanyo PLC-XF20 projector. …
Replace the lamps in your Sanyo PLC-XF20 projector Read More »
STEP-BY-STEP INSTRUCTIONS FOR SANYO PLC-XT10 LAMP REPLACEMENT When it’s time to change your lamp on your Sanyo PLC-XT10 projector, you’ll notice the yellow light blinking on the Lamp Replacement Indicator. Be sure to buy an authentic Sanyo POA-LMP48 (service part no 610 …
How to install your new Sanyo PLC-XT10 projector lamp Read More »
Replace your Sanyo PLC-XT15 projector lamp in 3 easy steps. If the picture on your Sanyo PLC-XT15 projector is dim or looks unnatural the Sanyo POA-LMP48 (service part no 610 301 7167) is reaching its end of life. You may also …
3 Easy steps to replace the Sanyo PLC-XT15 projector lamp Read More »
The Sanyo POA-LMP42 (service part 610-292-4831) should last between 1,000 to 3,000 hours. The exact lifespan of a genuineany Sanyo POA-LMP42 will vary depending on how much your projector is used and how regularly the air filters are cleaned. (Clogged air …
Your Sanyo PLC-XF41 projector is equipped to operate with four Sanyo POA-LMP42 (service part 610-292-4831) projector lamps. The Lamp Replace Indicator at the front and at the back of the projector will flash yellow when any of the four projector lamps is nearing …
Six steps to replacing lamps in the Sanyo PLC-XF41 projector Read More »
Your Sanyo PLC-XF40 projector has four Sanyo POA-LMP42 (service part 610-292-4831) projector lamps. When any of the four projector lamps is nearing the end of its life, the Lamp Replace Indicator at the front and at the back of the projector will flash …
Changing the lamps in your Sanyo PLC-XF40 projector Read More »
Your Sanyo PLC-UF10 projector is equipped with four Sanyo POA-LMP42 (service part 610-292-4831) projector lamps. There is a Lamp Replace Indicator at the front and at the back of the projector. When any four of the projector lamps is nearing end of …
How to replace the lamps in your Sanyo PLC-UF10 projector Read More »
You can expect between 1,000 to 3,000 hours of use from the SANYO POA-LMP38 (service part no 610 291 5868) if you’ve installed an authentic projector lamp. The exact amount of time will vary depending on how much your projector is …
STEP-BY-STEP INSTRUCTIONS FOR SANYO POA-LMP38 LAMP REPLACEMENT Your projector lamp has between 1,000 to 3,000 hours and when it has reached end of life the Lamp Replacement Indicator on the Sanyo PLV-70will blink yellow. When you see this yellow light this …
Your quick & easy guide for installing the Sanyo PLV-70 projector lamp Read More »
When you see the Lamp Replacement light turn yellow light on the top of your Sanyo PLC-XP45 projector it’s time to replace the projector lamp. Replace the projector lamp immediately with lamp model Sanyo POA-LMP38 (service parts no 610 291 …
How to install your new Sanyo PLC-XP45 projector lamp Read More »
