The lamp in your Sanyo PLC-SU31 projector should last between 1,000 to 2,000 hours before needing to be replaced. The lifespan will vary depending on how much the projector is used and if the filters are cleaned regularly. When your …
When to replace your Sanyo PLC-SU31 projector lamp Read More »
Replacing the Sanyo POA-LMP35 Lamp Assembly When your projector lamp is nearing end of life. you’ll see the Lamp Replacement Indicator turn blink yellow. Another signal for a new projector lamp is when the image goes dark or begins to look …
Step-by-step instructions for Sanyo PLC-SU30 lamp replacement Read More »
The Sanyo POA-LMP42 (service part 610-292-4831) should last between 1,000 to 3,000 hours. The exact lifespan of a genuineany Sanyo POA-LMP42 will vary depending on how much your projector is used and how regularly the air filters are cleaned. (Clogged air …
Your Sanyo PLC-XF41 projector is equipped to operate with four Sanyo POA-LMP42 (service part 610-292-4831) projector lamps. The Lamp Replace Indicator at the front and at the back of the projector will flash yellow when any of the four projector lamps is nearing …
Six steps to replacing lamps in the Sanyo PLC-XF41 projector Read More »
Your Sanyo PLC-XF40 projector has four Sanyo POA-LMP42 (service part 610-292-4831) projector lamps. When any of the four projector lamps is nearing the end of its life, the Lamp Replace Indicator at the front and at the back of the projector will flash …
Changing the lamps in your Sanyo PLC-XF40 projector Read More »
You can expect between 1,000 to 3,000 hours of use from the SANYO POA-LMP38 (service part no 610 291 5868) if you’ve installed an authentic projector lamp. The exact amount of time will vary depending on how much your projector is …
STEP-BY-STEP INSTRUCTIONS FOR SANYO POA-LMP38 LAMP REPLACEMENT Your projector lamp has between 1,000 to 3,000 hours and when it has reached end of life the Lamp Replacement Indicator on the Sanyo PLV-70will blink yellow. When you see this yellow light this …
Your quick & easy guide for installing the Sanyo PLV-70 projector lamp Read More »
When you see the Lamp Replacement light turn yellow light on the top of your Sanyo PLC-XP45 projector it’s time to replace the projector lamp. Replace the projector lamp immediately with lamp model Sanyo POA-LMP38 (service parts no 610 291 …
How to install your new Sanyo PLC-XP45 projector lamp Read More »
Follow our easy 10-minute guide to installation. It will take less than 10 minutes! The lamp in your projector is one of the most important pieces of equipment. Projector lamps, also known as projector light bulbs or projector bulbs, come …
3 Easy steps to replacing the Sanyo PLC-SW20 projector lamp Read More »
How to replace Sanyo PLC-XP21/PLC-XP21E projector lamp As your Sanyo PLC-XP21/PLC-XP21E projector lamp nears end of life, you’ll see the Lamp Replacement Indicator on the top panel blinking orange. Replace the lamp immediately with model Sanyo L600-0068. Be Prepared–buy the proper lamp …
Step-by-step instructions on replacing the Sanyo PLC-XP21 projector lamp Read More »
