Mitsubishi WD-60638 colors are red and green
Moderator: Angel
Forum rules
Mitsubishi WD-60638 colors are red and green
Re: Mitsubishi WD-60638 colors are red and green
Thank you for posting information on your Mitsubishi WD60638 DLP Television set... I have a few questions for you with regards to the issue at hand:
1 - Do the colors also appear off in the Menu System?
2 - Is this color issue happening on all inputs? Please test Digital and Analog (analog being VGA cable from a laptop or computer) as well as all HDMI and RCA, and Component inputs if possible.
3 - When was the last time the lamp was replaced? Where was the replacement light bulb purchased and do you have any clue if it was a Philips or Original Mitsubishi versus a generic?
I don't think the colorwheel is at fault in this situation... but out of curiosity, does it make any crackling or whirling noises?
The Mitsubishi WD-60638 is a really nice 1080p television set and I want to point you in the right direction once I have more information. Another question I have for you is what is the lamp part number of your Mitsubishi WD-60638 TV set? The reason I ask is that the wd60638 dlp set came with 2 different optical engines.. Knowing your lamp code or mitsubishi part number is important. I'm assuming the part number would be something like 915B441001 or 915B441A01 and it would be written in your user manual or on the lamp itself.
Let me know and I'll do my best to help you out with your mitsubishi dlp set!
Re: Mitsubishi WD-60638 colors are red and green
I think this is the org bulb wife says she thinks sears had replaced it but this tv set sits in out family room and its 3 years old and id guess there maybe 50 hours time on it if that I just don't remember cause we have 2 of these tvs other one is the 73 in same brand look just alike here's what I found so far number on bulb housing ---SERVICE PN :915B441001 3093A 103705417101 --------LAMP PN :915P106A10 3093A 1037 05417101 these numbers are on the black housing white sticker do I need to look at the bulb its self and see if I can find numbers incase it was changed but reused the housing if thats possible maybe ?
as to noise coming from the color wheel I hear nothing that sounds any different
ill check out those other plug in types and see if it looks the same and also the menu Thank you so much for helping!! Todd
ok looked on the bulb its self for numbers all I see is a very small white sticker on back of bulb it reads 0342N75D BLCK PRINT STAMPED ON BACK OF BULB --- TOP OSRAM P-VIP180/1 0 E22
if needed I mite be able to get numbers off color wheel also found a ver small board on back side of color wheel I hadn't ever noticed before its very very small not sure what it would be
Re: Mitsubishi WD-60638 colors are red and green
Good job with all the info.. That lamp part number is helpful and you found it! Your Mitsubishi WD-60638 uses a Mitsubishi 915B441001 Replacement Lamp... Which is what that number is on the sticker. No need for the text off of the color wheel!
I just need to the answers to these questions when you get a chance:
1 - Do the colors also appear off in the Menu System?
2 - Is this color issue happening on all inputs? Please test Digital and Analog (analog being VGA cable from a laptop or computer) as well as all HDMI and RCA, and Component inputs if possible.
The info on the lamp tells me that it's an original OSRAM brand lamp.. which is pretty good. If you ever need to replace it out of warranty, you can upgrade to a Philips lamp which will probably give you a better life and possibly a brighter picture. Although the original lamp inside is OSRAM, I've had a much better lifetime by using Philips brand lamps instead of the OSRAM. I don't know how Philips makes it work better than the original, but it just does.
Let me know and we will figure it out!
Re: Mitsubishi WD-60638 colors are red and green
hdmi2 looks to have color problems menu box looks red or purple in color ..green on faces
hdmi3 looks to have color problems menu box looks red or purple in color green on faces
as soon as I select hdmi 1 from hdmi 2 or 3 or from the antenna the color changes
havnt found anything to plug into the av jacks yet im thinking hdmi 1 looks the nest maybe ? im really not sure they tend to look all off a little bit but big color difference in those 4 different inputs
is any of this helpful at all
Re: Mitsubishi WD-60638 colors are red and green
Re: Mitsubishi WD-60638 colors are red and green
Thank you for doing your best to test all inputs on your Mitsubishi WD-60638 DLP TV. Do you know what the replacement lamp part number on your television is? This will help me determine which version TV you have. My guess is that your lamp part number is 915B441001. This lamp usually indicates that your TV is a V43 chassis and the lamp cartridge should have 915B441A01 on a sticker.
Also, when the last time you changed your lamp - and if you replaced it with an original, Philips, or generic bulb? The generic lamps can damage the optical block of the television set and this is what worries me. Hence, the question with regards to your Mitsubishi 915B441001 Replacement Lamp.
While you try to find out how to test your RCA / Analog VGA input - can you please enter your service menu and do a factory reset by turning off your television, then following this sequence on your remote:
A - Press Power to turn on your Mitsubishi WD-60638 DLP Television.
B - Press Menu - 2 - 4 - 7 - 0
This should get you into the service menu (which is different on each version V43, V43C, V43+, V43++)....
Depending on your TV version, there should be one of two options:
1 - Reset All Settings
2 - Initialize
Press ok on either of those two options... Let me know if the Mitsubishi WD60638 television colors change.
Re: Mitsubishi WD-60638 colors are red and green
ill try the reset on the tv in a min and reply back
Re: Mitsubishi WD-60638 colors are red and green
Re: Mitsubishi WD-60638 colors are red and green
Re: Mitsubishi WD-60638 colors are red and green
Re: Mitsubishi WD-60638 colors are red and green
You should see if a friend or neighbor has a mitsubishi TV remote. I believe there are many mitsubishi television remote models that will work on your TV. They all seem to have the same frequency for the menu button - and the numeric keys are all the same.
It doesn't necessarily have to be the remote for the Mitsubishi WD-60638 to work.
Re: Mitsubishi WD-60638 colors are red and green
any idea what part needs changed hate to throw parts at it but at this point it seems like its something simple
Re: Mitsubishi WD-60638 colors are red and green
- Attachments
-
- tv2.gif (760.67 KiB) Viewed 30742 times
-
- reds and yellows
- tv.gif (687.32 KiB) Viewed 30742 times
Re: Mitsubishi WD-60638 colors are red and green
Sorry about the late reply as I've been out of town and away from computers again...
The issue that you are experiencing does seem to be hardware related... Since the discoloration is also on top of the Menu system, this means the origin of this problem is Digital... if this was an analog issue, the digital screens such as the menu screen on the WD-60638 would come out with normal colors.
The most likely cause of this issue is either your DMD board (where the DLP Chip resides) or your Digital Board (board where the HDMI input is on)...
The way to test this is to connect a 100% analog raw signal to your TV - the only port that doesn't go through upscaling on your TV set is the VGA input (PC/Laptop connection)... If you connect a laptop or computer to the VGA input of your Mitsubishi WD60638 and the discoloration is also appearing on that input, then the problem is most likely your DMD board.
If your Analog (VGA) input does not experience discoloration - then the problem with your Mitsubishi DLP TV is most likely the Digital Board.
I hope this logic makes sense... Let us know if you decide to fix it and how it goes! You may be able to find these boards used online somewhere...