HLP5063W - Pic broken into 2-4 blocks, Flickers

[JohnH]

HLP5063W - Pic broken into 2-4 blocks, Flickers
Started out of the blue yesterday. Did it on and off at 1st. Now all the time. I switches between 2 to 4 square block on the screen with flickering and garbage displayed.
It does this on ALL inputs including PC and Air.
Any Help would be greatly appreciated. Can't really afford a new TV right now.
Thank You !!!

Screen Garbage

DLP-10.jpg (76.11 KiB) Viewed 2465 times

[JohnH]

Hey Thanks for the Reply!
Would that be the board just to the right of the Lamp Box? (see photo)
I think I got REALLY Lucky on this one.
I took the whole back off, setup a mirror in front of the TV so I could see it.
I started with that board only because it was the easiest to get to.
After wiggling the 3rd cable on it, (top right one)... VOILA! It's been working for about 3 hours now!!
I pulled off and re-seated all 3 cables for good measure, and blew out some dust while I was at it.
Wish me continued Luck on this one.

Cables wiggled

DLP-2-2.jpg (126.56 KiB) Viewed 2450 times