DLP Light Engine Parts

This form contains information on DLP, LCD Projection and other RPTV issues. Any information about a television device that requires a lamp and a ballast should be created here.

Moderator: Angel

Forum rules
User avatar
ChubbsTech
TV Wizard
TV Wizard
Posts: 404
Joined: Thu Feb 18, 2010 12:53 am
Location: Santa Ana Ca.

DLP Light Engine Parts

Postby ChubbsTech » Sat Mar 20, 2010 12:19 am

Hello every one, I’ve taken the time to create a post about light engines in general, there are many people who are frequently asking question about the components.
So here is a small reference guide for all DLP tvs, the light engine showed is from a Samsung TV.

The light engine is composed of 3 main components:
-Light tunnel.
-DMD board.
-Color wheel.

The light tunnel is located trough out the light engine, the lamp produces a white light, goes trough the color wheel, and goes out trough the light canons lens.
ASC02114.JPG
ASC02114.JPG (37.9 KiB) Viewed 14350 times

The DMD board is located on the bottom or side panel and controls the light engine. Its regularly encased in aluminum.
ASC02117.JPG
ASC02117.JPG (51.49 KiB) Viewed 14350 times

The color wheel is located in a “upside down” positions that is located at the front of the light tunnel.
ASC02126.JPG
ASC02126.JPG (39.49 KiB) Viewed 14350 times

When you go and buy a light engine, the color wheel and/or DMD is NOT always included.

You have to double check the description.
Remember Knowing Is Half The Battle !

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: DLP Light Engine Parts

Postby grayfox » Mon Mar 22, 2010 7:34 pm

This is great information, can you post one like this but for an LCD Projection light engine??? ;) thanks dude! :D
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound


Return to “DLP, LCD Projection, and other RPTV”