RCA HD50LPW42

[richard22]

picture filckers in a metalic coloration. What is the cause and cure?

[grayfox]

this is most likely a colorwheel issue, do you have any images?

[richard22]

[grayfox]

I am sorry I cannot see your comment on my quote :P

[richard22]

[grayfox]

Some light engines come with a colorwheel, but no they are 2 separate parts, one is the complete engine with the projector and DMD board, the other is the colorwheel by itself or the metal enclosure. The cheapest part would be to try to find the bare colorwheel for the TV and try that, but it is an extremely rare part and getting it from RCA is probably more expensive than getting the complete set (see below)

http://www.discount-merchant.com/RCA-75 ... 204066.htm

you might want to do some research first ;)

[richard22]

[grayfox]

hmm, I am not very familiar with RCAs as I am with Samsungs, but if you follow the general instructions on the Guides section of fixyourdlp.com for "colorwheel" you should be fine, nothing to cut or soder just a bunch of screws and some plugs ;) if you run into any problems feel free to post some pics! :geek:

[richard22]

[grayfox]

I dont know! if nothing can be placed to hold it there, I would suggest ordering the cable but it comes in a set :o see below....
http://www.discount-merchant.com/RCA-Ca ... 171477.htm